0
In a typical cooling system, the hot side is usually the top line, where heated fluid or air exits the system to be cooled. The return line, which brings the cooled fluid or air back into the system, is generally positioned at the bottom. This configuration allows for efficient heat exchange, as the hot fluid rises and the cooler fluid descends.
What else can I help you with?
What side on the tbi does the fuel goes in and what side is the return?
the larger (3/8) line coming to the tbi is the supply the smaller (5/16) line is the return
Vertical line along the left side of the graph and the horizontal line along the bottom?
These are the axes.
How do you form two squares by drawing 6 lines?
Draw a square. Find the midpoint of the bottom side and the left side, and also the middle of the square itself. Connect the midpoint of the bottom line with the middle of the square with a line segment. Connect the midpoint of the left side with the middle of the square with a line segment. Your second square uses part of the left and bottom side of the first square.
What does an relevant notation trangle look like?
A relevant notion triangle is a triangle where side a is the longest line of a the triangle, the side b is the second longest line from the top of the triangle down to the right side of the triangle. The last line is side c which is the shortest line from the top to the bottom left.
Is vertical up and down or side by side?
Vertical refers to a direction that is up and down, perpendicular to the horizon. In contrast, horizontal describes a side-by-side orientation, parallel to the horizon. Thus, vertical is not side by side; it indicates a straight line extending from the bottom to the top.
Where is the radiator drain for a 97 Eldorado ETC with the Northstar engine?
Below the transmission cooling line on bottom drivers side.
Where is the fuel pump located on a 1986 Chevy Silverado?
drives side of engine block silver or gold in color has 2 lines going to it. Justin Justin, you're mistaken. It's on the passanger side of the block. With one steel line and 1 or 2 hoses on the bottom side. Depending on if there is a return line. I belive that most of these do have a return line.
How do you remove cooling fan on 2000 cavalier?
Radiator Cooling Fan....From the bottom of the car. One screw at the bottom(engine side) 10mm I believe, then deal with that plastic thing at the top side,driver side. Careful of the radiator....
What side on the tbi does the fuel goes in and what side is the return?
the larger (3/8) line coming to the tbi is the supply the smaller (5/16) line is the return
Vertical line along the left side of the graph and the horizontal line along the bottom?
These are the axes.
Why is a square a paralleolgram?
Because the top line and the bottom line are parallel and the side lines are parallel.
How do you form two squares by drawing 6 lines?
Draw a square. Find the midpoint of the bottom side and the left side, and also the middle of the square itself. Connect the midpoint of the bottom line with the middle of the square with a line segment. Connect the midpoint of the left side with the middle of the square with a line segment. Your second square uses part of the left and bottom side of the first square.
How does a line graph work?
With a line graph you use lines. You put numbers at the bottom of the graph and numbers on the side. In other words the bottom numbers are on the x axis and the numbers on the side are on the y axis. Then when you have the dots on the graph you connect them and then it makes a line.
Where is temperature sensor for radiator fan?
It is on the bottom side or it is the line holes on the front.
How to get past level 29 of draw the rest?
swish line from to to bottom side
How do I identify the Supply and Return lines on a 3.5L Oldsmobile Intrigue transmission?
Although I am not familiar with the vehicle in question specifically, generally the line that goes to the top side of the radiator is the supply, and the line from the bottom of the radiator or trans cooler is the one returning the fluid to the trans.
Were is the location of the orifice tube for a 1996 Oldsmobile cutlass?
it is in the high side line towards the bottom of radiator on drivers side
