Simply because - due to the addition of heat, the water molecules in steam are further apart than those in cold water.
A meter is a measure of length. So a measure that is 1000 times larger than a metre would still be a length: it would never ever be a volume. So the question makes no sense.
The volume of a cylinder equals pi times the radius squared times the length, and there are 1000 cubic centimeters in a litre. Thus, 211.69 litres.
The volume is(1000)/(density of cement in kg/m3) cubic meters.
A volume that is 1,000 times larger than a millimeter cubed (mm³) is one cubic centimeter (cm³), as 1 cm³ is equal to 1,000 mm³. Thus, a volume of 1,000 mm³ is equivalent to 1 cm³.
The volume of a cube can be calculated using the formula ( V = \text{length} \times \text{width} \times \text{height} ). For a cube measuring 10 cm on each side, the volume is ( 10 , \text{cm} \times 10 , \text{cm} \times 10 , \text{cm} = 1000 , \text{cm}^3 ). Since 1 cm³ is equivalent to 1 milliliter, the volume is also 1000 milliliters, or 1 liter.
for converting cubic meter to ton , density or specific volume is needed. specific volume unite is m3/kg. steam cubic meter/ (cubic meter/kg)= steam (kg ) /1000= tone of steam
A meter is a measure of length. So a measure that is 1000 times larger than a metre would still be a length: it would never ever be a volume. So the question makes no sense.
The number of mmBTU in 1000 lbs of steam can vary depending on the specific heat content of the steam. On average, 1 lb of steam contains about 1,200 BTU, which would equate to 1.2 mmBTU for 1000 lbs of steam.
If 18 mL of the substance in the liquid state evaporated and its volume in the gaseous state is 1000 times greater, it would occupy a volume of 18 mL × 1000 = 18,000 mL, or 18 liters, in the gaseous state.
A meter is a measure of length. So a measure that is 1000 times larger than a metre would still be a length: it would never ever be a volume. So the question makes no sense.
cherick is the best <3
If the volume of the substance in the gaseous state is 1000 times the volume of the substance in the liquid state, this means that 1 ml of the substance in the liquid state would occupy 0.001 ml when it evaporates into a gas.
About 1244 litres at STP, i.e. 1,244 m3. This is calculated by using the Avogadro's law and the ideal gas law, which gives that water vapor will have the molar volume of 22,414 litre/mol at STP (with temperature of 273.15 K, i.e., 0o C). The molecular mass of water is 18,02 g/mol and the mass of one litre is about 1000 g.
Weight = Volume times Density To answer this question the density of the rod has to be known, probably in Kg per Cubic Meter ( kg/m3) Volume of rod is Cross-sectional Area times Length Area for Square section rod is 19/1000 times 19/1000 = 0.000361 square meters Length is 1 meter Therefore volume is 0.000361 cubic meters Area for Round rod section is π*D squared / 4 or 22/7 * 19/1000*19/1000 / 4 = 0.000284 square meters. Length is 1 meter therefor Volume is 0.000284 cubic meters Weight is Volume times Density All units have to be compatible!
The volume of a cylinder equals pi times the radius squared times the length, and there are 1000 cubic centimeters in a litre. Thus, 211.69 litres.
Volume = 1,000 cm3
If you were to take a cube with a volume of 1 m3 and filled it with water, 1000 L of water would fill it exactly. 1dm3 is 1l. This 10(1m) times 10 times 10 is 1000.