In some industries and trades like carpentry, masonry, measurements are in 1/8th inch and 1/16th inch steps. Also some of the drill bits increase in steps of 1/16th inch.
1 millimetre is smaller than 1/16 inch. 16 millimetres will not make an inch. It takes 25.4 of them. 1/16 inch is 58.75% larger than 1 millimetre. 1 millimeter is about 63% of 1/16 inch.
No. If you divide an inch into 16 equal pieces, you must put all 16 back to have a whole inch. It is 1/16 inch less than a full inch.
16. 1/16 x 16 = 1
if each mark is 1/16 inch then 4 marks is 4/16 inch = 1/4 inch
1/16
1 inch = 25.4 mm 1 1/16 inch = 1 x 25.4 + 25.4/16 mm
1 millimetre is smaller than 1/16 inch. 16 millimetres will not make an inch. It takes 25.4 of them. 1/16 inch is 58.75% larger than 1 millimetre. 1 millimeter is about 63% of 1/16 inch.
5/16 inch by 1 inch long approx.5/16 inch by 1 inch long approx.
No. If you divide an inch into 16 equal pieces, you must put all 16 back to have a whole inch. It is 1/16 inch less than a full inch.
+/- .060 = 1/16 "
1 inch and 1/16
1 11/16 inch socket1 11/16 inch socket
I assume you mean of an inch. There are 25.4 millimetres in an inch. 25.4/1000, *16 is 0.4064 millimetres.
16. 1/16 x 16 = 1
1 and 11/16 inch1 and 11/16 inch
That would be a 1 inch difference. 16 inch is shorter then a 17 inch rim.
if each mark is 1/16 inch then 4 marks is 4/16 inch = 1/4 inch