90 degrees.
It does not change.
No, only their positions will change.
90 degrees 90 degrees
0
64 n/m + 90 degrees + 90 degrees
4 stage first 25n/m +90 degrees+90 degrees+90 degrees
30N.m, then 90 degrees, then another 90 degrees.
7 nm then 90 degrees then another 90 degrees
90 degrees.
21.4 ft/lbs(29nm) + 90 degrees + 90 degrees
Some torque specs on head bolts require an additional angle torque after the initial foot pounds (or Nm) has been completed. Example, torque the head bolt down to 70 ft lbs then an additional 90 degrees. The torque gauge measures that 90 degrees for you so you can be accurate.
Oil bolt washers and threads lightly. stage 1: Torque all bolts to 30Nm stage 2: angle torque all bolts +90 degrees stage 3: angle torque all bolts +90 degrees
as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque
New head bolts must be used Stage1. 25Nm Stage2. +90 degrees Stage3. +90 degrees Stage4. +90 degrees.
1st turn 18.5 ft/lb 2nd turn 90 degrees, 3rd turn 90 degrees, 4th turn 90 degrees
25 ft lbs plus 90 degrees. for the 3 litre add another 90 degrees