Best Answer

Because with the metric units you only need to know multiplication (or division) by 10, 100, 1000 etc. All easily achieved by simply moving the decimal point. Furthermore, the same conversion factors apply to mass (grams), lengths (metres), and many other derived units - Newtons, Pascals, Joules, Calories etc.

With customary units you need to know tables for a whole range of numbers.

For example, with mass:

16 ounces = 1 pound

14 pounds = 1 stone

8 stones = 1 hundredweight

20 hundredweights - 1 ton

So you need 4 tables for mass.

For lengths you would need 12, 3, 22, 10, 8 (inches to feet to yards to chains to furlongs to miles). A set of 5 tables - involving 4 new numbers.

Q: Why is it easier to convert within metric units than it is within customary units?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

There are conversion factors. Within the customary system, with common units, you use12 inches (in) = 1 foot (ft)36 in = 3 ft = 1 yard (yd)792 in = 66 ft = 22 yds = 1 chain7920 in = 660 ft = 220 yds = 10 chains = 1 furlong63360 in = 5280 ft = 1760 yds = 80 chains = 8 furlongs = 1 mile (mi).Within the metric system10 millimetre (mm) = 1 centimetre (cm)100 mm = 10 cm = 1 decimetre (dm)1,000 mm = 100 cm = 10 dm = 1 metre (m)10,000 mm = 1,000 cm = 100 dm = 10 m = 1 decametre (dam)100,000 mm = 10,000 cm = 1,000 dm = 100 m = 10 dam = 1 hectometre (hm)1,000,000 mm = 100,000 cm = 10,000 dm = 1,000 m = 100 dam = 10 hm = 1 kilometre (km).To convert from a smaller unit to a larger one (left to right) you divide by the conversion factor.In both cases there are smaller and larger units. In the case of the customary system they basic unit-to-next unit conversion often requires yet another conversion factor. In the metric system, the conversion factor is 1,000.

Kilo (103) Hecto (102) Deca (101) Unit Deci (10-1) Centi (10-2) Milli (10-3)

They should be able to jump within a few inches of their height. This also gives them a set place to hit, making it easier to jump

The answer depends on the metric being used. With the "normal" Euclidian metric, the distance in 2-dimensional spance between the points (x1, y1) and (x2, y2) is sqrt[(x1 - x2)2 + (y1 - y2)2]. Analogous formulae can be used in spaces with 3 or more dimensions. If using the Minkowski or Taxicam betric, the distance is |x1 - x2| + |y1 - y2|. This metric, also known as the Manhattan metric, is the sum of the differences in the x and the y coordinates. If you start from the corner of x1 avenue and y1 street in a grid (like Manhattan) and want to go to the corner of x2 avenue and y2 street and assuming you do not tunnel through buildings, the distance that you need to travel is the Minkovski distance. There are many other metrics. In fact, there is a whole subject, within mathematics, called metric spaces!

A ton is 2000 pounds (907.185 kilos).A metric ton is 2200 pounds (1000 kilos).AnswerIt depends on which 'ton' you are referring to. There are two 'tons': a 'long ton' and a 'short ton'. Both are Imperial units of mass. The 'long ton' is used in Britain and most countries within Britain's sphere of influence; the 'short ton' is used in the US and those countries within the US's sphere of influence. The 'long ton' comprises 2240 pounds, whereas the 'short ton' comprises 2000 pounds.The 'tonne' (spoken as, 'metric ton') is a non-SI unit, equivalent to a mass of 1000 kg.A mass of one tonne is equivalent to 0.984 206 (long) tons.A mass of one tonne is equivalent to 1.102 311 (short) tons.As you can see, a tonne is very close to a long ton.

Related questions

You can convert Centimeters for free online at the Metric-Conversions Organization website. You can also use the free tools on the website to convert other units within the metric system.

To convert units within the metric system, you can use the method of multiplying or dividing by powers of 10. For example, to convert from meters to centimeters, you would multiply by 100 because there are 100 centimeters in a meter. Similarly, to convert from grams to kilograms, you would divide by 1000 because there are 1000 grams in a kilogram.

A metric converter is used to convert measurements from one unit to another within the metric system. It can help people easily convert units of length, weight, volume, and other metrics for various purposes such as cooking, construction, science, and more.

we use the metric system.Use a conversion table or conversion formula to convert units within a measurement system or between measurement systems. Simple conversions are used within the metric system where conversions are done by multiplying or dividing by a factor of 10.An example of a conversion formula would be converting between Fahrenheit and Celsius degrees. For example:Fahrenheit = Celsius × 9/5 + 32Celsius = (Fahrenheit - 32) × 5/9

we use the metric system.Use a conversion table or conversion formula to convert units within a measurement system or between measurement systems. Simple conversions are used within the metric system where conversions are done by multiplying or dividing by a factor of 10.An example of a conversion formula would be converting between Fahrenheit and Celsius degrees. For example:Fahrenheit = Celsius × 9/5 + 32Celsius = (Fahrenheit - 32) × 5/9

Divide AUs by 92,955,807. (rounded) (Divide by 93 million. It's easier, and it puts you within 0.05%.)

Some easy strategies to convert within the metric system include: Moving the decimal point: To convert between units, move the decimal point to the left or right based on the conversion factor. Remembering common conversions: Memorize common conversion factors, like 1 kilometer = 1000 meters, to make calculations quicker. Using conversion charts: Refer to conversion charts or online tools to easily convert between different metric units.

Well, within the Metric system, it's always by ten. So, 1 decigram is equals one gram, and one gram equals a decagram?Do the math?:)

The metric system of measurement is internationally recognized and is the standard for measurements within the scientific community . It is internationally recognized and used the world over. It is also easier and more intuitive in that it is based on divisions and multiples of ten.

There are conversion factors. Within the customary system, with common units, you use12 inches (in) = 1 foot (ft)36 in = 3 ft = 1 yard (yd)792 in = 66 ft = 22 yds = 1 chain7920 in = 660 ft = 220 yds = 10 chains = 1 furlong63360 in = 5280 ft = 1760 yds = 80 chains = 8 furlongs = 1 mile (mi).Within the metric system10 millimetre (mm) = 1 centimetre (cm)100 mm = 10 cm = 1 decimetre (dm)1,000 mm = 100 cm = 10 dm = 1 metre (m)10,000 mm = 1,000 cm = 100 dm = 10 m = 1 decametre (dam)100,000 mm = 10,000 cm = 1,000 dm = 100 m = 10 dam = 1 hectometre (hm)1,000,000 mm = 100,000 cm = 10,000 dm = 1,000 m = 100 dam = 10 hm = 1 kilometre (km).To convert from a smaller unit to a larger one (left to right) you divide by the conversion factor.In both cases there are smaller and larger units. In the case of the customary system they basic unit-to-next unit conversion often requires yet another conversion factor. In the metric system, the conversion factor is 1,000.

While it is customary in some cultures to bury the dead within 24 hours, in most Western countries, the burial takes place 3 to 5 days after the death.

== == It was a law passed by Congress that allowed the use of the metric system within the United States. (see related question)