On an LED, one leg will be shorter than the other. The shorter leg is the negative polarity.
Anode and cathode. Anode = negative lead, cathode = positive lead.
A hypotenuse should not be shorter than a leg length.
The difference between the shorter leg and the longer leg is 60ft. In the model, this distance is only 4in. Multiply 60 by 12 to get the difference in inches, 720in Divide 720 by 4 to find that the model is 180 times smaller than the real thing. Multiply the shorter leg by 12 to convert it into inches, 75*12=900 Divide 900 by 180 and you will have the length of the shorter leg of the model, 5in.
Let the length of the shorter leg be L, then the longer leg is L + 14.By Pythagoras then 262 = L2 + (L + 14)2 = L2 + L2 + 28L + 196 = 2L2 + 28L + 196676 = 2L2 + 28L + 196 : 2L2 + 28L - 480 = 0 : L2 + 14L - 240 = 0This can be factored : L2 + 14L - 240 = (L + 24)(L - 10) = 0As only a positive number answer applies and this is when L - 10 = 0 : L = 10.The length of the shorter leg is 10 feet.
the negative leg is shorter than the positive leg.
On an LED, one leg will be shorter than the other. The shorter leg is the negative polarity.
Current flows from the anode (positive terminal) to the cathode (negative terminal) in a LED. The longer leg of the LED indicates the positive anode side, while the shorter leg represents the negative cathode side.
because the negative leg is shorter.
Because if the shorter leg was shorter than the longer leg was long, then the longer leg wouldn't be longer than the shorter leg is short. The short leg would be the longer one rather than the long one being the short one.
The longer leg of an LED is typically the positive (+) terminal, while the shorter leg is the negative (-) terminal. Additionally, the positive leg usually has a flat edge or a notch near it as a visual indicator.
I'm not sure what you are asking. Could you please provide more context or clarify your question?
The length of the legs. The positive leg is always longer than the negative one.
The length of the longer leg of a right triangle is 3ftmore than three times the length of the shorter leg. The length of the hypotenuse is 4ftmore than three times the length of the shorter leg. Find the side lengths of the triangle.
Anode and cathode. Anode = negative lead, cathode = positive lead.
Cathode (negative) is the shortest leg and there is a flat edge on the base of the LED, and it must be connected to the negative wire or "-" connection. Anode (positive) is the longest leg, and must be connected to the positive wire or "+" connection, as electricity will only pass through a LED from positive to negative.
L.E.D has one leg longer then the other one, the longer one is positive and the smaller one is negative. If you have a l.e.d which has same length of legs then look inside the l.e.d for two kind of triangle peices and one of them will be smaller which is positive and one which is bigger and is negative.