0
What else can I help you with?
What is an area addressed by the General Requirements of Walking Working Surfaces?
This cannot be answered. You will have to give me some choices to choose from.
How find volume if you have surface area?
That would depend on what solid you are working with and also if you have access to other measurements, such as height, width and depth.
How does a net help when finding surface area?
the formula in finding the area is AREA=(LENGTH)(WIDTH) (HEIGHT) A=L X W X H) The total area of the net is the same as the surface area of the original. By working out the area of each part of the net and adding them together you get the surface area of the original object.
How long second compared with millisecond?
"milli" refers to "thousand", so there are 1,000 milliseconds in 1 second, or working from the other end, a millisecond is 1/1000th of 1 second.
Why are square units used when working with a three-dimensional figure?
Surface area of three dimensional figures are measured in square units whereas their volumes are measured in cubic units
What type of wrench prevents marring on finished surfaces?
None really, you just have to extra careful working near finished surfaces.
Why should the top surface of the reflecting hood be a light shiny surface rather than a dark Mat surface?
Having a light shiny surface on the top of the reflecting hood helps to reflect more light downwards onto the work surface. The shiny surface reflects light more efficiently compared to a dark matte surface which absorbs light, resulting in better illumination of the working area.
Signs that you have a bad carburetor?
uneven or non true surface of 1 or all surfaces, wich can cause a bad seal. or a carburetor that you have had rebuilt by 2 separate people but still it is still not working properly ( like my self )
To create friction in your hands what do you have to do?
You can create friction in your hands by rubbing them together rapidly and applying pressure. The friction generated by this motion will create heat due to the resistance between the two surfaces, leading to warmer hands.
What are working conditions compared of a chimney sweep to present day working conditions?
it was ok i guess
Which of these is an advantage of surface mining?
One advantage of surface mining is that it is generally a more cost-effective method compared to underground mining, as it requires less specialized equipment and labor. Additionally, surface mining allows for the extraction of large quantities of minerals over a large area.
What are the best application techniques for clear epoxy paint on wood surfaces?
The best application techniques for clear epoxy paint on wood surfaces include proper surface preparation, using a high-quality brush or roller for even application, working in small sections to avoid drips, and following the manufacturer's instructions for mixing and curing times.
Why Back-Rolling Works When Painting a Home's Exterior?
Back rolling is an effective way to work paint into the exterior surface of your home. It's best done with two people working together. The first person sprays the paint onto the home's exterior surface. The second person follows closely behind with a roller and rolls the paint into the surface. This assures that the paint is forced into the surface, providing long-lasting protection for your home. This is especially effective on wood and stucco surfaces or any surface that is rough. A thick nap on the roller is best for stucco, while a thinner nap will work fine on wood surfaces.
What is the purpose of an control surface?
The purpose of a control surface would vary depending on if one is referring to the music or flying. Control Surfaces are basically controllers in a localized format working with computer type software to help things function they way they need to. Bands use them for lighting and remote control planes use them to fly.
How far must the top guardrail be above the working surface?
The top Guardrail should be 3 inches (8 cm) above the working surface.
What causes gears to lose their efficiency?
Wear! As the working surfaces wear out, they don't mesh as well.
What is your opinion Of working men compared to working women?
for me, there is no different between the working of man and woman both of them are are capable to contbute the social economy .
