0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are some alternative uses for WD40 other than as a lubricant?
We use WD40 as a primer for starting an old mower engine when cold. A short spray is applied through the air intake to the carburetor WD40 works well as a grease remover on laundry. Just spray a greasy stain and wash with your regular laundry soap. It also removes gum from carpets and hair. You can remove price tags or tape residue as well.
How do you remove tar stains from carpets?
Though flammable rubbing alcohol and lighter fluid. A product shown in the past to remove tar well is WD40. After taking a dull knife to scrap the excess off, take one of the above chemicals (preferably the WD40) and blot onto the stain. Let it sit a couple of minutes and rub out with a cloth.
Is it OK to use wd40 oil to loosen screws holding in neg and pos connections to a F350 D truck battery?
Yes, you can use WD40 but penetrating oil would work better.
Why would the stick shift squeak?
use some WD40 and spray in to gear shift area http://www.autozone.com/servlet/UiBroker?UseCase=S001&UserAction=viewSimpleDiagInfo&Parameters=info wd40 would work, BUT wd40 attracts dirt like a magnet and problem will come back use a dry lubricant, the dirt dont stick to dry lubricant
Can you clean your mitre saw blades with CLR?
You can, but an oil based cleaner would be better. I use WD40.
How can I remove blue crayon stain from cream colored carpet?
You can try using a mixture of dish soap and warm water to blot the stain, followed by a mixture of white vinegar and water. Test these solutions on a small, inconspicuous area first to ensure they won't damage the carpet. If the stain persists, consider using a commercial carpet cleaner or consulting a professional carpet cleaning service.
Do you soak wd40 on adhesive on metal jewelry?
Before soaking metal jewerlry in WD40 to remove adhesive, test on a small area. This will prevent you from ruining the piece if the WD40 removes or damages the finish.
How do girls lubricate?
With WD40
Should i use wd40 on my brakes?
do not use wd40 on break parts..it leaves a residue....use a break clean product
How do you take stickers off dressers?
If it is ,man made surface, like plasic, that won't damage easily, I would suggest WD40. However, DO NOT use on wood, or any surface that you are even slightly worry will get damaged. If WD40 Is impracticable, I would suggest using warm, soapy water, and a nylon scouring pad.
Is WD-40 the number one multi-purpose lubricant?
Depends. wd40 is the best but jizzer is better at cleaning things. Jig-a-loo is also good if you want something that isn't smelly, doesn't stain, or is a better fit because it's silicone-based.
What can can you use to remove corrosion?
wd40.
