You need to till up the area and place good soil down to level out area after you have tilled it. Make sure it level for prper drainage. Then as you place the new sod down you need to pull at the ends of each sheet of sod to allow it to want regrowth. Make sure when you lay it down you lay it where ther is no gap in-between. Once it is layed you need to water, water, water!
10 m = 394 inches approx 100ft = 1200 inches exactly
180ft*100ft = 18000 square feet = 0.413 acres (approx)
jus get rid of the "ft"and do 10x10 which is 100! Add back on the "Ft" so it is 100ft! Learning you're 10 times table might help next time though? :) Hope this helps ;) Actually it's 100ft^2 as you do have to multiply the ftXft. 100ft is a distance while 100ft^2 is an area.
length to weight does not convert
100 ft = 30.48 metres.
At 100ft, the horizon is approx 12 miles away.
10 m = 394 inches approx 100ft = 1200 inches exactly
180ft*100ft = 18000 square feet = 0.413 acres (approx)
100ft = 30480mm
An acre contains 43,560 square feet. The conversion says that it would be .6887 of an acre.
100ft = 100 feet
100ft
420ft*100ft = 42000 sq ft = 0.964 acres
If would be 100ft x 100ft x 10ft. The first story of a Hotel.
100ft
jus get rid of the "ft"and do 10x10 which is 100! Add back on the "Ft" so it is 100ft! Learning you're 10 times table might help next time though? :) Hope this helps ;) Actually it's 100ft^2 as you do have to multiply the ftXft. 100ft is a distance while 100ft^2 is an area.
100ft