0
Yes, but you'll need way more detail than you can get from a simple answer.
You need:
The 8051 micro,
an LCD interface
the LCD, and
software to get the 8051 to drive the LCD.
You may be able to find a kit/project that already contains these items.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you connect pic 18F2550 with LCD?
PIC18F2550, Port B7-B4 should be connected to D7-D4 of LCD. Port B3 to EN pin of LCD, Port B2 to RS pin of LCD. The LCD is Topway alphanumeric type. All other general pins are connected according to their needs.
How do you connect a x rocker chair to a playstation 3 and bush hd ready lcd tv?
To the little connetter
How do you connect a ps2 to a HD ready tv?
With PlayStation 2 Component AV Cables or with Playstation PS2 AV Audio / Video Cable for 480i standard TV
What is the LCD of 1.5 and 2.3?
LCD refers to integers. The LCD of 15 and 23 is 345
What is fulform of LCD?
LCD Liquid Crystal Display
Why you using micro controller NoT micro processor?
Microcontroller have inbuilt memory, interrupts, etc. Which you will need to connect externally in microprocessor. Thus, Microcontroller is better than microprocessors
What is the Different Between Microprocessor and Microcontroller?
The basic difference between the microprocessor and microcontroller is that we can interface a microcontroller directly means "for example we can directly connect a keyboard to microcontroller to any of its ports"....where as for microprocessor we can't interface directly...we require a circuit board since it requires ram,ic's.....etc.,! beyrojac mahinay
How do you burn the software on a 8051 microcontroller?
You will need a 8051 device programmer that connect to a PC with software to drive the programmer
Is the Arkview USB-WA62 all you need to connect a laptop to a lcd tv?
An Arkview USB-WA62 will connect many devices.Connecting a laptop to an LCD tv is a very simple.
What are the basic parts used in a LCD module?
There are four main parts to a LCD module. These are LCD glass, a backlight, a LCD driver and finally the parts that are needed to connect the glass to the driver.
What cable can you use to connect a PCs LCD display to a router?
There is no way to hook a LCD to a router. The router is only made for "network" traffic. It's way different then the signals needed for the LCD. You only connect the ethernet cable from the computer to the router.
What port is required to connect a PC to an LCD TV?
The answer it's a VGA. To connect the TV with an LCD nowadays some graphic cards give an HDMI option. There are also cables from VGA to HDMI.
How does an digital thermometre work?
A digital thermometer has a digital controller called a microcontroller inside of it that measure the thermistors teperature by measuring its electric resistance. Then it displays it on a little LCD screen.
Could i play an atari system on the lcd flat screen tv?
I think it should be possible to do, as long as you have the correct cables to connect the gaming system to the television. This is a website with instructions on how to connect Atari 2600 to a LCD TV: http://www.ehow.com/how_5748156_install-atari-2600-lcd-tv.html
Can the Sony Bravia LCD TV connect to the internet?
The Sony Bravia LCD TV is a high end television a person can buy. It can be loaded and bought with the capacity to connect to the internet and other options that require a connection.
How is a microcontroller programmed?
That depends on the specific microcontroller.
What are the best books for embedded c language?
8051 microcontroller and Embedded System By Mazidigood for basic programms & hardware settings.pgms covered are LCD, KEYPAD, Temperature sensors etc.- nilesh
