Yeah or yeha
Total Internal Reflection is an optical phenomenon which occurs when a ray of light strikes a medium boundary at an angle larger than a particular critical angle with respect to the normal to the surface. If the refractive index is lower on the other side of the boundary, no light can pass through and all of the light is reflected. The critical angle is the angle of incidence above which the total internal reflection occurs. Hope I helped!
The angle is a right angle.
Although we use the term 'Phase angle' it's also an angle referred to another phasor (voltage or current).For example,conventionally when expressing power factor, we use 'voltage' as the reference. So the 'phase angle' of a particular phasor is the phase difference between our reference (voltage) & the phasor.As the gist, both mean the same except that 'phase angle' is the direction of the phasor w.r.t. positive x direction (reference)..AnswerBy definition, phase angle is the angle by which a load current leads or lags a supply voltage.Phase difference is the angle between any two electical quantities -for example, the angle two phase voltages of a three-phase system.
15
If two lines have angles theta1 and theta2 relative to some third arbitrary line, then the angle between those two lines is theta1 minus theta2. The normal of a line at a point is a line that is 90 degrees from the line going through that point, so the angle between a line and its normal is 90 degrees. As a result, the angle between the two normals of those lines is (theta1 plus 90) minus (theta2 plus 90), which is the same as theta1 minus theta2 because the two plus 90's cancel each other.
it is the angle between the direction of the incident ray and the refracted ray.
The angle of incidence is the angle between the incident ray (incoming light ray) and the normal (perpendicular line) to the surface it strikes. It's a critical factor in determining how light or energy is reflected, refracted, or absorbed by a surface.
No, the angle of incidence is the angle between the incident ray and the normal line, while the angle of refraction is the angle between the refracted ray and the normal line. In general, these angles are not the same, except in the case of normal incidence where they are both zero.
The refracted ray can coincide with the incident ray when light moves from one medium to another at a 90-degree angle relative to the boundary between the two media. This scenario leads to no bending of the light ray, resulting in the refracted ray following the same path as the incident ray.
the angle between the refracted ray and the normal
the angle between the refracted ray and the normal
the angle the theoretical incident ray makes with the final refracted ray
The angle between the refracted ray and the normal is called the angle of refraction. It is measured from the normal to the refracted ray inside a medium due to the bending of light as it passes through different mediums.
Light will be reflected at an angle of 30deg from the normal. We can work out the angle of refraction using the formula: n(1) sin(incident angle) = n(2) sin(refracted angle) We will assume the refractive index given is the relative refractive index n(2)/n(1). So sin(30)/1.5 = sin(r) r = 19.5 deg As the reflectedd and refracted rys are on the same side of the normal we can subtract them from 180 to get the angle between them: 180 - 19.5 - 30 = 130.5
The angle between the incident ray and the normal is called the angle of incidence.
The angle of incidence is the angle between the incident ray and the normal (perpendicular) to the reflecting surface.
When a ray of light travels from a denser medium to a rarer medium, the angle of refraction is greater than the angle of incidence. The reflected ray and the refracted ray lie in the same plane as the incident ray. Using Snell's Law and the principle of reflection, we can show that the sum of the angles formed by the refracted and reflected rays with the normal is equal to 90 degrees.