answersLogoWhite

0


Best Answer

.1 to .25

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the application rate for a prime coat?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How much is the application rate for asphalt prime coat?

Prime sealing coat shall be MC30 or MC70 complying with ASSHTO M82 or as directed by the Engineer and shall be applied to the prepared sub-base layer at a rate between 0.8 and 1.2kg/m2 and at a temperature between 60' C and 80' C. Tests shall be carried out on site to determine the rate of spread of the prime sealing coat material.


What is the application rate for a tack coat?

.05 to .15 gallons per square yard


How do you calculate the spray rate of asphalt prime coat?

AR = RAR / RAC Where: AR = application or shot rate of undiluted prime RAR = specified residual application rate RAC = residual asphalt content of prime There is good agreement in the literature on application rates. The Asphalt Institute recommends application rates of 0.9 to 2.3 L/m2 (0.2 to 0.5 gal/yd2) for MC cutbacks and 0.5 to 1.4 L/m2 per 25 mm of depth (0.1 to 0.3 gal/yd2/in depth) for asphalt emulsions. Others recommend from 0.65 L/m2 to 2.0 L/m2 (0.15 to 0.45 gal/yd2) . Application rates should vary based on the openness of the base and no more prime should be placed than can be absorbed by the granular base in 24 hours. Any excess should be removed with blotter sand.


What is the difference between tack coat and prime coat?

There is a substantial amount of misinformation concerning the function and proper use of prime. Prime is not glue-causing the base to adhere to the pavement is not its purpose. Prime's purpose is to protect the base from rain and light traffic, when the paving will be delayed.A prime coat is an application of an asphalt cutback or emulsified asphalt to a prepared base. The base can be either a sub grade or a base rock. Prime functions as a protector from rain for both types of bases. A primecoat should not be confused with a tack coat. Tack is an a adhesive for gluing two asphalt layers together.


Should you put a prime coat on new drywall before you add blown acoustical?

No, the prime coat can go on anytime.


How many liters of Prime coat mc1 equals to 1 ton?

Prime Coat MC1 has a density of approximately 1.06 tons per cubic meter. Thus, 1 ton of Prime Coat MC1 is approximately equal to 0.943 liters.


Where can one find out what the prime rate is on any given day?

One can find out what the prime rate is on any given day by going to the Fed Prime Rate website. The website has up to date information on what the prime rate is.


Where can I find what the prime rate is?

You can find what the prime rate is by talking to experts. You could also find out what the prime rate is by talking to friends and family to see if they know anything.


What is the hourly rate at burlington coat factory What is the hourly wage for burlington coat factory?

7.75


What is the major importance of prime coat on base course?

The major importance of prime coat on base course should be to produce an appropriate surface for a stronger bond between the asphalt binder course and the base course. Apart from this, the prime coat also discourages the intrusion of surface moisture into the underlying layers.


What is the prime interest rate and how does the average bank customer fare in regard to the prime interest rate?

The prime rate is the rate that a bank charges its most creditworthy customers. The average customer can expect to pay one or two percent (or more) above prime.


How would I find the prime rate?

To find the prime rate by going to the Wall Street Journal's website. Its website publishes the most recent prime rate. The Wall Street Journal also predicts the rate.