its so easy but first you have to buy a waveboard then when you have it put in on a smooth surface then the nose of the board you put you're foot on it then you push off with your back leg and put it in the board then when your finally on the board you have to push your legs with the board back and forth and with he back leg you turn i hope you learn how to ride a waveboard. Good luck
The price of the ticket on Stenaline depends on the route you are travelling and the time you are going. The cheapest adult route is Belfast to Liverpool which can be as cheap as å£30 for an adult on foot.
The cost largely depends on the quality of the carpet you want. The lower end costs $3.70 per square foot, while the higher end carpet costs about $5.49 per square foot.
YOUR LOOKING ABOUT 150.00 A SQFT IF LUCKY
lets break it down. if you are laying 4" x 4" tiles down, they cost 20 cents each, you need 12 tiles to equal a sqft (12"x12") so that is 20 cents x 12, or 2.40 a sqft. if you have a tile that is 24"x12" at 1.50 a tile that equals 75 cents a sqft
Mahogany costs retail about $6 per board foot (1 foot x 1 foot x 1 inch) that's $72 per cubic foot. There are 35.3 square feet to a square metre so I think the approximate answer is $2500 retail.
$5,000 per board foot
A board foot is 12 inches by 12 inches, 1 inch thick. Any combination of measurements that equal this is 1 board. 6x24x1 is 1 board foot. 2.9 board foot could be anything. There should be another measurement saying what this is. Board foot is used to figure cost as most common wood is the same price per board foot. Could be 2x4, 2x12 or 1 inch, it all works out the roughly the same price.
That appears to vary widely across north America. In my area,western Canada, it is about 45 cents board foot for regular sheet.
if the board is 8 inches width by 8 foot long by 2 inches thick at $5.50 per linear board what is the price per board?
The board-foot is a specialized unit of volume for measuring lumber in the United States and Canada. It is the volume of a one foot length of a board one foot wide and one inch thick.
Assumption: 6 x 6 is using inches as the unit (half a foot) and a 4 foot board means 4 square feet of board. Each square foot of board can be cut into four half foot x half foot pieces. Therefore, the 4 foot board would be able to make 16 half foot x half foot (6 inch x 6 inch) blocks.
A board foot is 12 inches by 12 inches by 1 inch thick. A board 6 inches wide, 24 inches long and 1 inch thick is still 1 board foot. Any combination of the three measurements that add up to the first, 12x12x1 is considered 1 board foot.
It depends on the shape. A thin section will cost less than a board, a moulding less than rough cut etc.
A board foot is 1' by 1' by 1", so it is 200 square ft 1 inch thick.
Each square is 1.5 in by 1.5 in
Like Oak Wood from Oak Trees . . . Cherry wood comes from Cherry trees