0
Which input value produces the same output value x 3 x 2 x 1 x 3?
Wiki User
∙ 9y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why op amp are called linear devices?
the output has the same shape of the input signal
Is a resistor an input?
A Resistor does exactly what the name suggests, it creates resistance. More precisely, it creates resistance for the flow of electrons, effectively limiting the amount of current flowing through it(and via ohms law, limits voltage). To answer the question, A resistor isn't an input or output device, it behaves the same way no matter how you turn it and it can be placed on the input of a component(or circuit) aswell as the output.
When is that the NA ND logic gate can function as a NOT logic gate?
The NAND gate has two or more inputs, and one output. This output is the complement of the AND of all the bits and will only be 0 if all the inputs are 1.A NOT gate on the other hand has only 1 input, and the output is the complement of this input.So to make a NAND gate into a NOT gate, we should tie (short, connect to same value) all the inputs of the NAND gate. At the output we would have the complement of the signal given at the tied inputs.This way we have a NOT gate from a NAND gate.
What kind of device is a resistor?
A Resistor does exactly what the name suggests, it creates resistance. More precisely, it creates resistance for the flow of electrons, effectively limiting the amount of current flowing through it(and via ohms law, limits voltage). To answer the question, A resistor isn't an input or output device, it behaves the same way no matter how you turn it and it can be placed on the input of a component(or circuit) aswell as the output.
How using two-input logic gates of your choice design a circuit to determine if two 3-bit numbers are the same or different?
Three 2-input XOR gates and one 3-input NOR gate will do the work. Connect each output of each XOR gate to one input of the 3-input NOR gate and apply the two 3-bit words to the inputs of the XOR gates. If X (X2X1X0) and Y(Y2Y1Y0) are two 3-bit words, X2 and Y2 will connect to one XOR gate, X1 and Y1 to the next XOR gate and X0 and Y0 to the last XOR gate. You could see the result of the operation on a LED connected to the output of the NOR gate. Other implementations are also possible of course. The solution above is absolutely correct, but includes a 3 input gate. If the task is to use only two input gates, then a small change will be needed. Take the outputs from any two XOR gates into a 2 input OR gate. Then take the output of the OR gate and the output of the third XOR gate into a 2 input NOR gate. The operation remains identical to the first solution but adheres to the brief of using gates with 2 inputs. In the real world, there is probably no reason to impose such a limitation on a design so the first solution would normally be the preferred route to take.
What is the function rules of input and output?
The rule is what actions (operations) the function performs. The only requirement is that for each imput there is an output and that the same input always results in the same output. (Different inputs can have the same output).
A function may assign the same output value to two different input values?
True
How do you determine whether a table of input output data is a function?
If every input has an output. If two outputs are the same, they must have the same input.
What is meant by non inverting amplifier?
There is no such thing as an inverting or a non-inverting op amp.All op amps have both an inverting input and a non-inverting input. Their operation is such that the output will go to whatever value is required to make both inputs be the same. This implies feedback from output to inverting input.
Why the peak value in double ended differential amplifier is double the peak value of single ended differential amplifier for the same input signal?
The peak output value in a double ended differential amplifier is double the peak output value of a single ended differential amplifier for the same input signal because there are two outputs, one being the normal output, and the other being the inverted output. Whatever the normal output does, the inverted output does, but with a reverse sign. As a result, if one output has a value of X, then then other output has a value of -X. If you compare the two outputs, then, the difference between them will be 2X, or double the value.
Is the input in a function table supposed to be the same as the rest of the input?
No, because then the output would be the same as the rest of the output(s).
Will every input have the same output?
no
Is a tablet an input or an output device?
I believe you are referring to the screen only. A touch screen works as a input and output device
What will be input and output current of 10 KVA 3 phase UPS?
It will depend on input & output voltage, if voltage is same current will remain same
Why terminals of opamp are called as inverting and noninverting?
In an op-amp, an input on the inverting terminal drives the output in the opposite direction, while an input on the non inverting terminal drives the output in the same direction. In a normal closed loop negative feedback configuration, there is feedback from output to inverting input, so that the output becomes a known function of input. So long as you stay within limits, the output will go to whatever value is required to make the inputs be the same.
Can a digital circuit produce the same output voltage for different input voltage values explain?
No, value of output voltage depends upon the value of input voltage and digital can not produce the same output voltage for different input values. For example, suppose in a digital circuit two switches are connected. A closed switch is represented by 1 and an open one by 0. If there are two switches and we say that they are in state 1, then it would mean that both of them are closed. In this circuit after connection with the battery some current would pass so we call this current as output.Depending upon the states of the switches, the current either would pass or it would not pass.In case the current is passing, we can say the value of output is 1 and it is 0 when no current is passing. Whether the value of the output would be 1 or 0, it depends upon the values of input variables( 1 and 0) which specify the state of the switches.In this example, the switches form the input variable because the value of output depends upon the state of these variables which shows that digital circuit can not produce same output voltage for different values of input voltage.
Are speakers input or output?
Output, Because they dont affect the computer, but a keyboard is input because you can enter keystrokes. Same for a mouse.
