Because the gypsum only needs 2 percent added to the mix
Gypsum is added to cement to decrease the setting time.
There are two basic types of mineral. 1. Macro -- It is the amount mineral needed by the body which is larger than 100 milligrams. Examples: Calcium, phosphorus and magnesium 2. Trace-- It is the amount needed by the body in small amounts Example: Iron 3.Gypsum--a common white or colorless mineral (hydrated calcium sulphate) used to make cements and plasters (especially plaster of Paris) Gypsum is a very soft mineral composed of calcium sulfate dihydrate, with the chemical formula CaSO4·2H2O. A common mineral of evaporates in inland salt playas. Calcium sulphate the raw material (minerals alabaster, satin spar, selenite) used for gypsum plasters, wallboard/drywall; gypsum plaster, unlike cement, expands on setting, does not crack unless there are faults in the backing; must never be mixed with Portland cement.
2 percent
2 percent
Between 2 and 5 percent of the general population suffer from acrophobia, with twice as many women affected than men.
Gypsum is added to cement to decrease the setting time.
The construction industry uses both the natural and the synthetic forms of gypsum in Portland cement manufacturing. Although the amount of gypsum used in the mix represents a small percentage of the volume of all ingredients, gypsum has important functions.
A special mill-mixed gypsum plaster containing barium salts. with the mixture of 4:4:2 ratio of barium, sand, cement and some lime
51.5
$180.00 + 2% = $183.60
Cement is a powdered mineral, which when added to water reacts to form an element that glues sand, gravel and stones. Its produced by propositioning of different elements that include, calcium oxide, silicon oxide, aluminum oxide and iron oxide, and burning them in a clinker at a temperature about 1450 to form clinker which is then grounded to form cement.
It is not known who discovered Gypsum. It has been in use for about 9000 years. Gypsum has 2 forms, rock and mineral form.
About 80ml of water must be added to 40ml of a 25 percent by weight solution to make a 2 percent by weight solution.
The raw material used for manufacture of cement are limestone and clay. They are ground to form very fine powder and then converted to slurry. The slurry is baked at very high temperature to form granular mass called kilnker. The kilnker is ground and mixed with powdered gypsum to form cement.
About 80ml of water must be added to 40ml of a 25 percent by weight solution to make a 2 percent by weight solution.
2 - Gypsum
CaSO4.2H2O ---> CaSO4.1/2H2O + 3/2 H2O