answersLogoWhite

0

In America, Canada and other countries using a similar 60 Hz electrical service, few appliances which use mainly electronic components require a 240 volt plug outlet for everyday homeowner use.

On 60 Hz services 240 volt outlet plugs are very large and are intended for use with large aplliances such as clother dryers, ranges, water heaters, etc.

Another answer

Actually, my husband and I bought a tanning bed several years ago to use in our home. We had to call in an electrician and have one 240 volt outlet put into our workout room. There are, however, tanning beds that run on everyday outlets. We chose one with some extra features, which required more power.

There are many countries outside the USA, Canada, etc. which use a 50 Hz electrical service so that 220-240 volt power is standard in all homes. Hence domestic electronic equipment that is not operated on batteries mostly uses 220-240 volts in those parts of the world.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Music & Radio

How do you split up a 240 volt outlet for 110 power?

A 220 outlet will have one neutral (white) and two hots (black and red normally) just use the neutral and just one of the two hot wires. Careful where you do this because normal 110 breakers are 15 or 20 amp and normally 220 breakers tend to be either 30 amp for a dryer or 50 amp for a stove.


What does a 120V plug look like?

115 and 120 volt receptacles or outlets are the normal outlets that you plug everyday items into. It has the two slit lookings things on either side and usually a third hole for the ground.Since I cannot include a mini pic may I suggest you take a look at any electrical wall outlet (ac recepticle) found in your home that you plug appliances or a lamps into. This rectangular recepticle is normally covered with a plastic plate for beauty and protection. It is made to receive a plug from another appliance in order to be powered by electric current. There are two verticle slots side by side above and a round hole slot just under if a ground is included in the recepticle. The verticle slot(shorter slot) to the right is considered HOT(Voltage applied) and the one to the left is considered COMMON (return). The Plug connects into the Recepticle and makes a good electrical connection between the house wiring and the appliance. Normal voltage supplied here in the USA is 60 cycle 110-120 volts AC(alternating current). Standard Plugs in this voltage range may be called 110, 115, or 120 vac. There are 240 plugs available for higher current and power needs such as Air Conditioners. They come in a variety of configerations so that you must match the plug to the recepticle. Some have slanted and some straight verticle prongs but all are more massive in construction.


What is the top speed of a stock 93 eagle talon awd?

Answer mine went up to 233ish on straight and more than 240 on downhill but dash stoped220 on a straight stretch, over 240 down hill with good tires. you'll want Z quality if you go any faster than about 240


What temperature does a car over heat?

nowadays about 240 degees Fahrenheit


How much does Jerome Williams weigh?

MLB player Jerome Williams weighs 240 pounds.

Related Questions

What type of electrical outlet is required for a device that operates on a 240 volt 50 amp plug?

A device that operates on a 240 volt 50 amp plug requires a NEMA 6-50 electrical outlet.


How do I know if I have a 30 amp breaker at my house to plug a trailer into?

If it is a 30 amp breaker then it is a 240 volt outlet.


How can I convert a 240 volt power source to a 120 volt power source using a 240 volt to 120 volt adapter?

To convert a 240 volt power source to a 120 volt power source using a 240 volt to 120 volt adapter, simply plug the adapter into the 240 volt outlet and then plug your 120 volt device into the adapter. The adapter will step down the voltage from 240 volts to 120 volts, allowing you to safely power your device. Make sure the adapter is rated for the appropriate wattage to avoid damaging your device.


Can you change wall plugs 110 volt systems to suit 240 volt appliances?

No, you cannot simply change the wall plug to make a 110 volt outlet support a 240 volt appliance. The voltage requirements of the appliance and the outlet must match for safe operation. You would need to install a dedicated 240 volt outlet and ensure that the wiring and circuitry can handle the higher voltage. It is recommended to consult a licensed electrician for this type of electrical work.


What type of electrical outlet is required for a device that needs to be plugged into a 50 amp 240 volt plug?

The device requires a NEMA 14-50 outlet, which is a 240-volt, 50-amp outlet commonly used for high-powered appliances like electric stoves or RVs.


What type of electrical outlet is required for a 4 prong generator plug to be safely connected?

A 4 prong generator plug requires a 240-volt outlet with four slots to be safely connected.


What do the letters stand for on a 4 prong plug?

On a 240 volt outlet, such as a dryer outlet: G is Ground, W is Neutral, X and Y are the two Hot legs.


How do you get 240 volts out of a 110 outlet?

You would have to run new wires to obtain 240 volts or use a step-up transformer.


Can you use 110 volt batteries charger here in Australia?

Not unless you have a 110 volt supply to plug it in to. The standard General Power Outlet in Australia is 240 volts AC at 50 Hertz.


Does a 2 horsepower rotary converter plug into 120 single phase and convert it to plug in a 3 phase outlet?

All my experience with rotary phase converters have been in converting 240 volt single phase into 240 volt three phase. They all were hard wired into their respective systems, so my answer is no.


What are the differences between a 120 volt outlet and a 240 volt outlet in terms of their electrical capabilities and applications?

A 120-volt outlet is typically used for lower power devices like lamps and small appliances, while a 240-volt outlet can handle higher power devices like ovens and dryers. The main difference is the amount of voltage each outlet can provide, with 240 volts being able to deliver more power for larger appliances.


Can you plug in a 110 volt tool straight into a 240 volt power supply?

no