Awg 16-2 how about 12/2?
Chat with our AI personalities
To change an inward-swinging door to an outward-swinging door, you would need to remove the door, turn it around and affix it to the opposite side of the door frame. The mounting hardware will need to be removed from its original location and moved to the other side of the frame.
I would say 1 of your door switches are bad or your door doesn close all the way.
I just had this happen to my 2004 Grand Cherokee Limited. I turned out to need to replace the wire from the driver door into the car. Additional Info: This is a common problem for jeeps. As the driver's door is the most frequently used, the wires in the door harness have a tendency to kink or break. The same thing happened to my 95 GC Laredo.
door number (1) door number (2) door number (3) and door number (4)
check an inside switch that would turn it on and make sure it's not all the way on, to the left I think if it's on a rotary knob, or the wire came off a door post pin so that when the door is closed the light would go off, but not if a wire is off.