Well the most probable answer is that you are exceeding your electrical load limits. This means that all the circuits on that 100amp breaker, i.e. ligts, outlets,etc are drawing more than the 100 amps you have available. You can most likely fix this by installing a higher amp main breaker, however if you do that you also need to check and possible install larger circuit breakers. Also you might want to check all your grounding and make sure you actually have all your outlets and lighting going to "earth ground", and if you have any GFCI circuits which would be in the bathroom or the kitchen and they are tripping due to excess amp draw or a short, this also could be a possiblilty.
There could be several reasons for the power shutting off or lights flickering with a 100 amp breaker on an outside pole, including overloaded circuits, short circuits, loose connections, or a faulty breaker. It is recommended to contact a qualified electrician to inspect the issue and address any potential safety hazards.
The lights flickering when another circuit is activated can indicate a voltage drop or overload issue. You can troubleshoot by checking for loose electrical connections, ensuring the circuit breaker is not overloaded, and testing the voltage levels to identify the cause and make necessary repairs. If you are unsure, it is recommended to consult with a licensed electrician for a professional assessment.
The number of can lights that can go on one breaker will depend on the wattage of each light and the maximum load capacity of the breaker. It's important to calculate the total wattage of all the lights and ensure it does not exceed the amp rating of the breaker to avoid overloading it. Consult with an electrician to determine the appropriate number of can lights that can safely go on one breaker.
Yes, a dimmer switch can cause lights to flicker if not compatible with the type of bulbs being used or if the dimmer switch is malfunctioning. Flickering can also occur if the wiring connections are loose or damaged. It is recommended to use dimmer switches that are specifically designed for the type of bulbs being used to prevent flickering.
This could be due to an overloaded circuit, a short circuit, or a faulty breaker. To determine the exact cause, it is best to consult with an electrician who can assess the situation and make the necessary repairs or adjustments.
Fluorescent lights flicker due to various reasons such as a faulty ballast, loose wiring connections, or a nearing end of the bulb's lifespan. It's recommended to check and replace the ballast or tube if needed to resolve the flickering issue.
Flickering Lights was created in 2000.
flickering lights
The light began flickering before it went out. Flickering lights frighten me.
Have your alternator checked out.
If your lights are flickering on your 98 Bravada, you might have a shortage. It can also indicate that your alternator is failing.
The flickering of the candlelight was relaxing.The lights keep flickering, we should call an electrician.The doctor noticed that his eyelid was flickering.
Assuming there's nothing wrong with the light circuit itself, usually a large load on the same branch circuit (circuit breaker) will cause this. Is your refrigerator on the same circuit? When the compressor kicks on, it will drag down the voltage on the entire circuit. This is most easily noticed by flickering or dimming lights.
Fire
Yes, "flickering" can be a noun referring to the act of rapidly flashing on and off, such as a flickering of lights.
usually this flickering affects the headlights to and is caused by a bad alternator
The flickering lights on boiler chimneys in power stations are aircraft warning lights. The spacing and blinking frequency are chosen to signify the height of the obstruction.
There could be many causes for the flickering instrument panel lights, but the most probable cause is a loose connection in the circuit providing the power to the lights, or a loose or poor ground connection.