0.5709"
Direct Conversion Formula
14.5
mm
*
1 in
25.4 mm
=
0.5708661417
in
Wiki User
∙ 11y ago14.5 mm is approximately 0.57 inches in diameter.
One inch is equal to 25.4 millimetres. Therefore, 145 inches is equal to 145 x 25.4 = 3683 millimetres.
38 mm ÷ 25.4 mm/in ≈ 1½"Direct Conversion Formula38mm*1 in25.4 mm=1.496062992in
There are 1000 millimeters in one meter. There are 100 centimeters in one meter. This means that there are 10 millimeters in one centimeter.This means you can divide 145 / 10 to obtain 14.5 centimeters.
The volume of a sphere is given by the formula V = (4/3)πr^3, where r is the radius. The radius of a 20 mm diameter ball is 10 mm (half of the diameter), which is 1 cm or 0.3937 inches. Plugging this into the formula gives V = (4/3)π(0.3937)^3 ≈ 0.209 cu inches.
5 inches divided by PI is approximately 1.5915 inches. To convert this to millimeters, you would multiply by 25.4 (since 1 inch is approximately 25.4 mm), resulting in a diameter of approximately 40.42 mm.
One inch is equal to 25.4 millimetres. Therefore, 145 inches is equal to 145 x 25.4 = 3683 millimetres.
32mm is 1.26 inches.
US coins are normally measured in metric units. A nickel is 21.21 mm in diameter and there are 25.4 mm in an inch, so the diameter in inches would be 21.21/25.4 = 0.835 inches
According to Red Book specifications, a standard CD is 120 mm (4.75 inches) in diameter and 1.2 mm (0.05 inches) thick
38 mm ÷ 25.4 mm/in ≈ 1½"Direct Conversion Formula38mm*1 in25.4 mm=1.496062992in
There are 1000 millimeters in one meter. There are 100 centimeters in one meter. This means that there are 10 millimeters in one centimeter.This means you can divide 145 / 10 to obtain 14.5 centimeters.
The volume of a sphere is given by the formula V = (4/3)πr^3, where r is the radius. The radius of a 20 mm diameter ball is 10 mm (half of the diameter), which is 1 cm or 0.3937 inches. Plugging this into the formula gives V = (4/3)π(0.3937)^3 ≈ 0.209 cu inches.
The diameter of a standard discus ring is 2.5 meters. This dimension is set by the International Association of Athletics Federations (IAAF) and is used for official competitions.
Cylinder diameter is the Bore.Bore is 73.0 mm (2.87401575 inches)Stroke is 77.4 mm (3.07424409 inches)
2.38189"Direct Conversion Formula60.5mm*1 in25.4 mm=2.381889764in
25 mm = 0.9843 inches.
17.9mm is the diameter of a dime..705 inches 17.91 mm