The units are incompatible. Psi refers to pounds per square inch voltage is a measure of electro motive force.
The k in kV stands for 1,000 and the v stands for volts. Divide 25,000 by 1,000 you get 25 kv.
you should be paying attention in class. you should listen. you should know the answer. what is your problem big man. the answer is obvious. it is 25 volts
I=V/R In words, Amps equals power divided by voltage. So you need to know voltage. Assuming 120 volts, Amps=5600/120=46.7
750ml is equal to approximately 25.36 ounces.
There are many units of pressure, however, atm is another common one so I'll convert it to that. It is 0.000246730817 atm
25-30 psi
100 psi and all within 25%100 psi and all within 25%
Fully charged battery should have 12.6 volts. 75% charged 12.4 volts, 50% charged 12.2 volts, & 25% charged 12.0 volts.
about 25-30 psi....
The k in kV stands for 1,000 and the v stands for volts. Divide 25,000 by 1,000 you get 25 kv.
A: It should be the same if equal size [after 5 times RC], However if one has a 5 volts rating and the other is 25 volts rating they probably will both blow up if connected across 30 volts source in series. Why if one leaks and they all do then the 5 volts will blow then the 25 volts the voltage must be equalize for each to be used in series.
you should be paying attention in class. you should listen. you should know the answer. what is your problem big man. the answer is obvious. it is 25 volts
Well, 25 twos is equal to 50. So 10 fives are equal equal to 25 twos.
Approximately 125 psi, all within 25%.Approximately 125 psi, all within 25%.
25 psi x2 35 psi loaded
.25
A: It may tattoo your face when it blow up if the 25 volts is used where a 50 volts should be, you may substitute 47 mfd 500 volts for the 50volts cap and the 25 volts cap But you cannot substitute 15 volts for the 25 volts capacitor