For a resistive load Watts = Volta * Amps. Therefore, you have 1/4 amp or 250 Milliamps (250ma)
Chat with our AI personalities
To calculate amps, use the formula: Amps = Watts / Volts. In this case, 6 watts / 24 volts = 0.25 amps. So, 6 watts at 24VDC is equivalent to 0.25 amps.
To find the amperage, you can use the formula: Amps = Watts / Volts. In this case, with 72 Watts and 12 Volts, you would have 6 amps of current.
This depends on the voltage ... amps = watts / volts 660 W / 110 V = 6 amps 660 W / 220 V = 3 amps 660 W / 330 KV = 2 mA
To find the amps, you need to divide the wattage (10,000 watts) by the voltage of the circuit. For example, at 120 volts, 10,000 watts would be approximately 83.33 amps.
That depends on the voltage, but the residential standard is 240 volt. At that voltage you sit at around 15 amps, however it MUST be on a 20 amp circuit for national (US) or Canadian electrical code, as you can only load your circuit to 80% of it's capacity.
Watts and Volts are different units. It is like asking how many apples are there in 6 oranges. Watts = Volts x Amps x Power Factor Power Factor ranges from zero to one.