Wiki User
โ 12y agoIt depends on the refractive index of the plastic. There are many different kinds of plastic and they do not have the same refractive index.
Wiki User
โ 12y agoThe angle of refraction can be calculated using Snell's Law: nโsin(ฮธโ) = nโsin(ฮธโ), where nโ is the refractive index of air (1.00), ฮธโ is the angle of incidence (35 degrees), nโ is the refractive index of the plastic (1.49), and ฮธโ is the angle of refraction. Plugging in the values gives: (1.00)sin(35) = (1.49)sin(ฮธโ). Solving for ฮธโ gives an angle of refraction of approximately 23.6 degrees.
The minimum index of refraction for total internal reflection at a 45-degree angle is 1.41. This means that the glass or plastic prism would need to have an index of refraction greater than or equal to 1.41 to achieve total internal reflection at that angle.
Yes, the incident ray will bend when it enters a curved plastic container due to refraction. The bending of the ray occurs because light travels at different speeds in different materials, causing the ray to change direction as it enters the container.
tape cartridge
Refraction
The first law of optics, also known as the Law of Reflection, states that the angle of incidence is equal to the angle of reflection. This law describes how light rays interact with a reflecting surface by bouncing off at equal angles.
The minimum index of refraction for total internal reflection at a 45-degree angle is 1.41. This means that the glass or plastic prism would need to have an index of refraction greater than or equal to 1.41 to achieve total internal reflection at that angle.
Yes, the incident ray will bend when it enters a curved plastic container due to refraction. The bending of the ray occurs because light travels at different speeds in different materials, causing the ray to change direction as it enters the container.
Yes, plastic can refract light. The amount of refraction depends on the specific properties of the plastic, such as its density and composition. The angle and intensity of light passing through the plastic will influence how much it is refracted.
tape cartridge
The principle involved is the refraction of light. Light waves change speed and direction when passing from one medium to another of different optical density, causing the light to bend at the boundary. This bending of light is what allows us to see the transparent object in the clear liquid.
Refraction
It is called a microscope slide.
Small cuts in the plastic cause refraction of a lazer beam to send a code that gives the information
: On the Ford Focus, the resistors are attached to a blue rectangular plastic carrier.
It, like every thing else at 0 degrees kelvin, will freeze
Internal refraction occurs when light passes from one medium to another and bends due to a change in speed. This bending is caused by the change in the refractive index of the two media. It is a common phenomenon seen in lenses and prisms.
With proper cleaing at 135 degrees your plastic drinkware should be safe from germs.