0
Can 100 watts amp handle 300 watts subwoofer i have a pioneer 300watts sub and a 100 watts rockford amp will the amp handle it or it will get fry?
An amp can only put out so much power without distortion. A speaker, say, a subwoofer, will utilize whatever the amp is able to put out. So the question is not will a speaker fry an amp, but whether the amp will blow the speaker. (Not, in your example)
Any speaker, though, needs a certain amount of power to begin to drive it to listenable levels. High-efficiency speakers like bass-reflex speakers need only 5 or 10 watts for loud levels, while a low-efficiency speaker may not even make a squeek until they are fed with 10 to 15 watts of power.
sO will this set up work or not?
What else can I help you with?
You can grip this with your hand?
handle
How do you handle excess chemicals?
you handle them by combing them to make one great drug
Is neon safe to handle without any safety precautions?
is neon safe to handle
How do you handle chemical solvents and cans?
Explain how to handle the following computer Cans: Answer text
Is dry ice good to handle with an 8 year old?
no it is not because it is not safe to handle
How many watts can the Rockford Fosgate Prime 2-Channel Car Amplifier handle?
The Rockford Fosgate R150-2 2-channel amp puts out 50 watts RMS per channel to your speaker system, or you can bridge it to supply 150 watts RMS to a subwoofer.
What is the best amplifier to run a pioneer tsw510spl 12 subwoofer?
The Pioneer TSW510SPL 12 subwoofer is designed to handle up to 1,200 watts RMS, so you'll want an amplifier that can deliver sufficient power. A good choice is the Pioneer GM-D9601, which is a Class D monoblock amplifier that can produce up to 1,200 watts RMS at 1 ohm, matching the subwoofer's capabilities well. Additionally, ensure the amplifier has a suitable impedance match and includes features like low-pass filtering for optimal sound quality.
Can a planet audio 800watt push a 12in 1300watt pioneer or a 12in 1200watt sony xplod?
Yes, a Planet Audio 800-watt amplifier can push a 12-inch 1300-watt Pioneer subwoofer or a 12-inch 1200-watt Sony Xplod subwoofer, but it may not fully utilize their maximum potential. The amp's power rating indicates its ability to deliver sound, but the subwoofers can handle more wattage, which means they may not reach their fullest performance. It's important to ensure that the subwoofer's impedance matches the amplifier's output for optimal sound quality and efficiency.
Is there a difference in sound quality and or loudness between the Rockford Fosgate P300-10 and P300-12?
Yes, there is a difference in sound quality and loudness between the Rockford Fosgate P300-10 and P300-12. The P300-12, with its larger 12-inch subwoofer, typically produces deeper bass and higher overall loudness compared to the P300-10, which has a 10-inch subwoofer. The larger driver allows the P300-12 to handle more power and deliver a fuller sound, making it better suited for bass-heavy music. However, the choice between the two may also depend on personal preferences and specific space or installation requirements.
When connecting a dual voice coil subwoofer to a mono amp what is the best way to connect the subwoofer to the amplifier?
To connect a dual voice coil subwoofer to a mono amplifier, the best method is to wire the voice coils in parallel if the amplifier supports the resulting impedance. This configuration will lower the overall impedance, allowing the amp to deliver more power to the subwoofer. If the amp cannot handle the lower impedance, you can wire the coils in series, which will increase the impedance but reduce the power output. Always check the specifications of both the subwoofer and amplifier to ensure compatibility.
What is better the kicker solo x or jl audio w7?
The solo x is a bad subwoofer it can handle a lot of wattage and will break windows. JLs is a good sounding sub but probably cant handle as much wattage as the solo x
Will a 1600 watt amp blow a 450 watt sub woofer?
Well, it depends. When you look at subwoofers, it will say RMS and peak. Now, let's talk about the "RMS" and "peak" on the subwoofer. The RMS is the real power. That's what were gonna be looking for. The RMS is the continuous power design for the subwoofer to operate. The peak is the maximum power the subwoofer can handle. Obviously, were not gonna be running the subwoofer with its peak power because that will decrease the life of your subwoofer. Running too much power or too little can damage your subwoofer. It's also important to run it by it's RMS rating. So, I don't know if that 450 watt is the RMS or peak. I'm assuming that it's the RMS. As long as you don't bridge it, it should be fine.
How many watts can the Kicker 08DS12L72 Dual 12 in. 1500 Watts Enclosed Car Audio Subwoofer handle?
The Kicker 08DS12L72 can pump out up to 1500 Watts, but you'll need a beefy receiver for that.
How do you open a Yamaha sw-p130 subwoofer?
To open a Yamaha SW-P130 subwoofer, first, ensure it is unplugged for safety. Use a screwdriver to remove the screws on the back or bottom panel, depending on the model. Carefully lift or slide off the panel to access the internal components. Handle all parts with caution to avoid damaging any connections or the speaker itself.
Does the Pioneer CDX-FM687 6-Disc also have MP3 abilities?
No.That's a common complaint among buyers actually.They regret not getting a player which could handle MP3s.
Is a special tool needed to remove the window windup handle on a 1986 Jeep Cherokee Pioneer front door?
Yes and it should ge available at the parts store pretty cheap.
What does sickle look like?
It is a metal blade that is crescent - moon shaped with a wooden handle. In the pioneer days or even before then it was used to cut wheat, tall grasses, and weeds ( those sorts of things)
