No, it is not safe to use a double pole 15 amp breaker in place of a 20 amp single pole breaker for a 12000 BTU air conditioner. The breaker size must match the electrical requirements of the appliance to prevent overheating and potential fire hazards. It is recommended to consult with a qualified electrician to ensure the proper breaker is used.
Puron is a refrigerant used in air conditioners and has a specific heat capacity measured in BTUs. The cooling capacity of an air conditioner using Puron can range from 1.5 kW (5,000 BTU) to over 5.5 kW (18,000 BTU), depending on the size and model of the unit.
It depends on the btu of the unit
The size of the amp breaker for a 220V air conditioner will depend on the specific requirements of the air conditioner. As a general guideline, you can calculate the required amps by dividing the air conditioner's wattage by the voltage (220V). For example, if your air conditioner is rated at 5500 watts, you would need a breaker of at least 25 amps (5500 watts / 220 volts = 25 amps). It is always best to consult the manufacturer's specifications or a licensed electrician to ensure the correct size breaker is installed.
Yes, a 20 amp breaker is suitable for a standard window unit air conditioner. Make sure to check the manufacturer's specifications to ensure compatibility.
OK
12000 per hour
if the nameplate says 120 volt, then yes. but might trip breaker if the circuit is overloaded and or only 15 amps
at 230v it will use 5 to 6 amps
Nope
No, it is not safe to use a double pole 15 amp breaker in place of a 20 amp single pole breaker for a 12000 BTU air conditioner. The breaker size must match the electrical requirements of the appliance to prevent overheating and potential fire hazards. It is recommended to consult with a qualified electrician to ensure the proper breaker is used.
The Amps means the volume of flow of electricity. The Amps depends on its BTU (British Thermal Unit). BTU is the unit to measure the energy that is consumed to perform some Air Conditioner. 12000 BTU Air conditioners uses 5 to 6 Amps. 18000 BTU Air conditioners uses 9 to 10 Amps. 12000 BTU air conditioners also called 1 Ton AIR CONDITIONER and 18000 BTU Air conditioners are called 1.5 Ton and so on. The 2 Ton or 24000 BTU Air conditioners use 15 Amps to work.
A 12,000 BTU air conditioner can typically cool a room size of 350-550 square feet. This can vary depending on factors such as insulation, ceiling height, and sunlight exposure in the room. It's recommended to consider these factors when determining the appropriate size air conditioner for your room.
The Amana 12000 BTU Energy Star Room Air Conditioner with 11260-BTU Heater is good because it is window mounted.
The Amana 12000 BTU Energy Star Room Air Conditioner with 11260-BTU Heater is good.
The size of the area that a portable air conditioner will keep cool varies depending upon the number of BTU's the unit has. For example, a 12000 BTU air conditioner will cool an area between about 500-600 square feet while a 8000 BTU air conditioner will cool an area of approximately 300-350 square feet.
That is a 3 ton unit. One ton of A/C = 12000 btu. The 36 in the model number refers to 36000 btu.