12
--------------
In the United States and according to the NEC, in commercial and industrial installations, you may have as many as 13 receptacles on a 20 amp circuit. There is no limit to the number of receptacles you can place on a circuit in a home.
Check the appliance's specifications on the strip, tag or plate that is usually fixed either on the back or somewhere on the frame. On there you will find its required operating voltage and wattage that it draws.If your home has 240 volt line voltage just divide the watts by the volts for the answer.Example: a 2400 watt water heater for a 240 volt line using the formula watts / volts = amps would give you 10 amps. For a 120 volt appliance it would be 20 amps.
Since power = voltage * current we have current=power/voltage so 3500 watts/230 volts = about 15.218 amperes in a heater using a resistance to generate heat. This should be valid even though the "230 vac" indicates that it is an AC circuit and not a DC circuit.
The power rating of the electric space heater is 3480 watts (29 A * 120 V).
TV 150 watts, computer 200 watts, laptop 40 watts, refrigerator 15 watts average, toaster 900 watts, light bulbs 15-150 watts, fan 20 watts, a/c 3000 watts, space heater 2000 watts, hair dryer 1000 watts, oven/stove 3000 watts, microwave 1000 watts. Total energy used is equal to the watts times the time. The total energy in units or kWh is the power in kilowatts times the time in hours.
An electric heater is a resistor that dissipates electric power when a voltage is connected across it and a current flows through it. The amount of power in watts is equal to the voltage times the current in amps. Typical space heaters for use in the home are 1.5 kW to 3 kW to heat a single room.
Current (amps)=Watts/Volts =2000/120 =16.75 =16.75 amps
Depends upon the size, but it will be listed on the space heater for whatever speed you set. Sometimes the nameplates are difficult to find and might be located on the bottom of the space heater.
Check the appliance's specifications on the strip, tag or plate that is usually fixed either on the back or somewhere on the frame. On there you will find its required operating voltage and wattage that it draws.If your home has 240 volt line voltage just divide the watts by the volts for the answer.Example: a 2400 watt water heater for a 240 volt line using the formula watts / volts = amps would give you 10 amps. For a 120 volt appliance it would be 20 amps.
Since power = voltage * current we have current=power/voltage so 3500 watts/230 volts = about 15.218 amperes in a heater using a resistance to generate heat. This should be valid even though the "230 vac" indicates that it is an AC circuit and not a DC circuit.
Wattmeter is an intrument which is used to measure the power consumption of an Electric circuit or an appliance which is connected to the supply in terms of Watts.
A good rule of thumb is to aim for 10 watts per square foot, so for a 280 square foot room, you would need a space heater with around 2800 watts to effectively heat the space. However, factors like insulation, room layout, and outside temperature can also affect the heater's efficiency.
Lowes and Home Depot carry circuit breakers as well as the wiring and box. Circuit Breakers come in several watts, so be sure you get what is appropriate for your living space.
Watts is the amount of power the heater has and amps would be the draw- if it is a 120 volt heater than the amps would be 12.5 amps and it is instantaneous
The power rating of the electric space heater is 3480 watts (29 A * 120 V).
TV 150 watts, computer 200 watts, laptop 40 watts, refrigerator 15 watts average, toaster 900 watts, light bulbs 15-150 watts, fan 20 watts, a/c 3000 watts, space heater 2000 watts, hair dryer 1000 watts, oven/stove 3000 watts, microwave 1000 watts. Total energy used is equal to the watts times the time. The total energy in units or kWh is the power in kilowatts times the time in hours.
An electric heater is a resistor that dissipates electric power when a voltage is connected across it and a current flows through it. The amount of power in watts is equal to the voltage times the current in amps. Typical space heaters for use in the home are 1.5 kW to 3 kW to heat a single room.
A block heater typically draws around 6 to 10 amps of current. It may vary depending on the wattage of the heater and the voltage of the electrical system it is connected to.