0
You can certainly use the larger breaker panel provided that you sub-feed the panel using breakers that do not exceed the rating of any down-stream device.
If you have any concerns or do not thoroughly understand what you are doing, contact a qualified electrical contractor in your area.
What else can I help you with?
What type of primary circuit is used when lighting makes up the substantial portion of the load?
In the US most residential an a fair amount of commercial lighting is done with 110 volt 15 or 20 amp Alternating Current (AC) curcits. A large amount of office lighting is done with 277 volt 15 amp ac curcits. Some is done with 240 volt ac and some with 480 volt ac, but these ar usually in industrial or large area applications. There is also 208 and other source power applications but these are rarer still. LED, Florecent and other types of lighting is supplied through transformers with various voltages from 2 or 3 volts up to 10 or 15000 volts at very low amprages. The general rule is to accomplish the lighting requirements with the most efective and efficent possible amps and curcits based on the available power supply scource. Terry Combination building inspector
Can you set Honda Accord alarm with open door?
No you can't set the alarm when the door is open,the obpc has to read a closed curcit,like say for your home alarm system,if any of the zones shows open it will not allow you to arm it till you close all curcits....i hope this helped
