Wiki User
∙ 15y agothe answer is no period. You will only make this circuit breaker trip more often. you will need to install another 20 amp circuit or install what is called a piggy back circuit breaker. you can may find this at Lowes or Home Depot or better yet take a circuit breaker out of the electrical panel and go to a electrical distributor.
Wiki User
∙ 13y agoNo, Cutler Hammer 1-pole breakers are designed to accommodate only one conductor per terminal. It is not recommended to install multiple conductors on a single terminal as it can lead to overheating and potential safety hazards. If you need to connect multiple conductors, you should consider using a different type of breaker or a junction box.
Wiki User
∙ 15y agoMost breakers allow for 2 conductors to be installed under the screw plate.
If you don't have a Westinghouse breaker, you should use a breaker that is compatible with your electrical panel. Consult the panel's specifications or a qualified electrician to determine the appropriate replacement breaker for your specific panel. Using an incompatible breaker can be dangerous and may violate electrical codes.
Siemens and Eaton are two common brands that make breakers that are compatible with Gould GFCI breakers. Ensure to check the specifications and compatibility to make sure the replacement breaker will work properly in your electrical panel.
In general, Cutler Hammer breakers are not designed to fit in GE panels. It is recommended to use breakers that are specifically designed for the brand of panel to ensure proper compatibility and safety. Using incompatible breakers can pose a risk of electrical malfunction or damage.
Yes, some electrical breakers can move to the off position when they trip. This is a safety feature to indicate that the circuit is no longer functional. To reset the breaker, switch it back to the on position, then to the off position before resetting it to on. If the breaker continues to trip, there may be an underlying issue in the circuit that needs to be addressed.
Siemens QP and Murray MP circuit breakers will interchange with ITE EQ-T circuit breakers as they are all compatible. However, it is always recommended to refer to the manufacturer's specifications to ensure compatibility and safety.
No, a Cutler Hammer will not work in a GE panel or vice versa.
No one ever installs a water hammer they install a shock absorber such as an air chamber
No, a Cutler Hammer will not work in a GE panel or vice versa.
You can find tools like a breaker hammer on many different websites such as Amazon or the Eaton website. You will find a variety of different tools to buy.
Install a water hammer arrestor (air chamber)
install an air hammer arrester. Any plumber can install it in a few minutes. Also make sure your water pressure isn't to high
The price range for a new Makita Breaker Hammer is between $400 and $1700 depending on the model and features that you require as there are several different types.
No, they will not fit. You can use Westinghouse, Cutler Hammer BR series, and Connecticut Electrical UBITBC series breaker. All of those will fit.
vertically
Obtain a large Hammer preferably heavy like a sledge hammer, swing violently! remove broken pieces, install new light.
If you don't have a Westinghouse breaker, you should use a breaker that is compatible with your electrical panel. Consult the panel's specifications or a qualified electrician to determine the appropriate replacement breaker for your specific panel. Using an incompatible breaker can be dangerous and may violate electrical codes.
The key to breaker compatibility is if it fits correctly into the buss bars in the electric panel.