The price of a 250 watt amp can vary depending on the brand, features, and condition. On average, you can expect to pay anywhere from $100 to $500 for a 250 watt amp.
1 amp
A 15 amp circuit can handle approximately 8-10 60 watt bulbs. Each 60 watt bulb draws 0.5 amps of current, so you divide the circuit's amp rating (15 amps) by the current draw per bulb (0.5 amps) to get the approximate number of bulbs it can handle.
A 300 watt bulb requires a circuit breaker of at least 2.5 amps. This can be determined by dividing the power (300 watts) by the voltage (120 volts). However, considering normal breaker sizes, a 5 amp breaker would be sufficient for a 300 watt bulb.
To calculate the amp hours used by a 13 watt bulb, divide the wattage by the voltage of the power source. For example, if the bulb is connected to a 120V power source, the current drawn would be 13W/120V = 0.1083 amps. This means the bulb would use 0.1083 amp hours for every hour it is on.
$250
The price of a 250 watt amp can vary depending on the brand, features, and condition. On average, you can expect to pay anywhere from $100 to $500 for a 250 watt amp.
I am not a sound man but an electrician. But as I understand it, speakers only receive power. So if you connect 300 watt speakers to a 250 watt amp, you can only get 250 watts out of the speakers. If this understanding is correct, this could not blow your amp. I might say, however, that in most things electrical, they are not intended to be used at maximum output for very long. So if this understanding stays true with sound equipment, then running your 250 watt amp at maximum output in an attempt to get 300 watts out of it, this could shorten the life of your amp even though you never actually overload it.
.5 amp
1 amp
2.083 amp
A 15 amp circuit can handle approximately 8-10 60 watt bulbs. Each 60 watt bulb draws 0.5 amps of current, so you divide the circuit's amp rating (15 amps) by the current draw per bulb (0.5 amps) to get the approximate number of bulbs it can handle.
100 bulb
YES! it won't reach it's peak, but that's also probably a good thing, cause it'll be harder to blow your sub. i prefer to buy either the exact watt match for my subs and amp, or buy the next lower watt amp from my subs
depends on what the rms is. The 1000 is there for looks, the rms is what you really want to look for.
There is no 115 volt, 100 amp, or 400 amp switch on the dash of a 2008 Tacoma.
A 300 watt bulb requires a circuit breaker of at least 2.5 amps. This can be determined by dividing the power (300 watts) by the voltage (120 volts). However, considering normal breaker sizes, a 5 amp breaker would be sufficient for a 300 watt bulb.