Square feet can't be converted to metric tons. Square feet measure area, while metric tons measure mass.
The metric unit used to measure the area of a door is typically square meters (mยฒ) or square centimeters (cmยฒ).
To convert square feet to square meters, you can use the conversion factor 1 square foot is equal to 0.092903 square meters. Therefore, 18 feet by 13 feet is equal to 214.81 square feet. Converting this to square meters gives approximately 19.96 square meters.
A 2x6x16 board would have a total of 192 square feet. This is calculated by multiplying the length by width (16 x 6 = 96 square inches) and then converting square inches to square feet (96 sq in รท 144 = 0.67 sq ft). Finally, the answer is multiplied by 2 since there are two sides to the board.
To find the area of the given dimensions in square feet, you need to multiply the length and width in inches and then convert the result to square feet. In this case, 76 inches by 126 inches would be 7608 square inches. Converting this to square feet by dividing by 144 (since 1 square foot is equal to 144 square inches), the area would be approximately 52.83 square feet.
Square feet can't be converted to metric tons. Square feet measure area, while metric tons measure mass.
7.5 x 9.0 feet in metric, first work out 7.5 x 9.0 feet which is 67.5 square feet, now convert 67.5 square feet to metric which is 6.2709552 square metres.
Square inches x 0.00694 = square feet
Square inches x 0.00694444 = square feet
There are two steps to take to answering this question: converting imperial to metric and calculating the surface area. These steps can be taken in any order. You also have to know how many meters are in a foot. (0.3048) Converting the 10 feet and 14 feet to meters is done by multiplying by 0.3048 resulting in 3.048 meters and 4.2672 meters. You can then multiply these to get an area of 13.0064256 square meters. You can also multiply 10 feet by 14 feet to get an area of 140 square feet, which you then need to multiply by the square of 0.3048 (0.09290304) to get 13.0064256 square meters again. You need to square your meters/feet ratio in that last step because you are now converting square feet to square meters meters.
Divide by 144.
Answer: One square meter = 10.7639 square feet. So, just multiply the number of square meters by 10.7639 to get square feet.
Answer: One square meter = 10.7639 square feet. So, just multiply the number of square meters by 10.7639 to get square feet.
Square meters is a measure of area and must be expressed in square feet if converting. It would equate to 75347.37 square feet
1 square meter = 10.76 square foot
You can't convert feet into square feet; they are two entirely different and incompatible units. Converting feet to square feet is like converting apples to oranges. A linear foot is a unit of distance. A square foot is a unit of area. If you have a rectangular surface, you can compute the area in square feet by multiplying the length in feet by the width in feet. For example, a rectangular patio that is 12 feet wide by 15 feet long has an area of 12 x 15 = 180 square feet.
Multiply sq m by 10.76391 to get sq ft