Wiki User
β 13y agoAnswers for the US:
A true 2-pole breaker (with a single operating handle) is designed such that an overload on either pole will cause a trip, disconnecting both poles. This type of breaker must be used to supply a 240 volt appliance.
Breakers with separate operating handles or separate breakers should never be used to supply 240 volt appliances, because a trip on one of the breakers may not trip the other, leaving the circuit energized - a very dangerous condition. This is absolutely illegal in the US.
Another view:
They make both types. If a 220-240 Volt device is connected to a 2-pole breaker it may be using both 110-120 V to operate. For example an electric stove may have 220-240 V across the heating elements and use 110-120 V for the clock. Hence, if only one pole tripped the stove may appear to be on because the clock is working, but the 220-240 functions won't work. If you find this condition, have it immediately corrected, because it is both unsafe and illegal.
Wiki User
β 13y agoA two-pole breaker requires a trip on both poles to completely shut off power to the connected circuit. If only one pole trips, the breaker may still allow power to flow through the other pole.
A circuit breaker with 2 switches typically refers to a double-pole circuit breaker. This type of circuit breaker has two separate switches that simultaneously disconnect both the positive and negative wires of a circuit, providing complete electrical isolation. It is commonly used for appliances or devices that require a dedicated electrical connection.
Both the Earth and a bar magnet have magnetic fields that extend outwards from their poles. They both have a north and south pole orientation, and like poles repel while opposite poles attract. Additionally, they both have the ability to interact with other magnetic materials in their vicinity.
If one of the 120-volt legs in the main breaker has lost power, it can cause issues with appliances and devices operating on that circuit. This can lead to uneven power distribution in your electrical system and may require troubleshooting by a qualified electrician to identify and resolve the underlying cause of the power loss.
No.
You can find both poles at 90 degrees, N and S, respectively.
Both a 45 amp and 50 amp breaker would require 6 AWG wire. So if you have 6 AWG wire and any devices like an outlet are rated at 50 amps or greater you are okay.
It sounds like the breaker is unserviceable. Seeing as it supplies 240 volt outlet it must be a two pole breaker. If it is a single handle two pole breaker then one pole set inside the breaker is not disconnecting one of the lines. If it is supplied from two single pole breakers that has a common tie, the common tie might be loose and does not shut off both poles when thrown to the off position. If there is no common tie then both breakers must be turned off to interrupt the 240 volt supply.
A two pole breaker protects both L1 and L2 legs. An over current on either leg will trip the breaker.
A circuit breaker with 2 switches typically refers to a double-pole circuit breaker. This type of circuit breaker has two separate switches that simultaneously disconnect both the positive and negative wires of a circuit, providing complete electrical isolation. It is commonly used for appliances or devices that require a dedicated electrical connection.
You canβt.
Both the Earth and a bar magnet have magnetic fields that extend outwards from their poles. They both have a north and south pole orientation, and like poles repel while opposite poles attract. Additionally, they both have the ability to interact with other magnetic materials in their vicinity.
If one of the 120-volt legs in the main breaker has lost power, it can cause issues with appliances and devices operating on that circuit. This can lead to uneven power distribution in your electrical system and may require troubleshooting by a qualified electrician to identify and resolve the underlying cause of the power loss.
disconnect both poles, wait 5 minutes, lossen the bolt, replace your battery, tighten the bolt, connect both poles. here you go disconnect both poles, wait 5 minutes, lossen the bolt, replace your battery, tighten the bolt, connect both poles. here you go
The equator is 90 degrees of latitude from both poles.
They both weigh and cost less.
No.
Not necessarily - consider a horseshoe magnet for example, both N and S poles are close to each other. The N and S poles on the Earth are roughly opposite each other. Both poles wander somewhat, and the S pole is travelling NNE steadily at the moment.