To determine the cost per square foot of the driveway to handle an 80,000-pound load, you would need to consider the type of material and thickness required for the driveway, as well as any necessary reinforcement. It is recommended to consult with a contractor who specializes in driveway construction to get an accurate estimate based on your specific needs and the local building codes.
No it is not metric unit. It is foot-pound-sec unit. Psi is pound per square inch.
To calculate how many 10-pound bags of powder are needed, first convert the 25,000 square meters to square feet (1 square meter is approximately 10.76 square feet). Then, determine the total amount of powder needed by dividing the square footage by 500 (amount of powder per 500 sq ft). Finally, divide the total amount of powder by 10 (amount per bag) to find the number of 10-pound bags required.
To convert from square centimeters per gram to square inches per pound, you can use the following conversion factors: 1 square centimeter is equal to approximately 0.155 square inches and 1 gram is equal to approximately 0.0022 pounds. By multiplying these conversion factors, you can convert square centimeters per gram to square inches per pound.
NONE of these is a metric unit:-- inch, foot, yard, mile-- square inch, square foot, square yard, square mile, acre-- ounce, pound, ton-- fluid ounce, cup, pint, quart, gallon
To convert pounds per square feet to pounds per square inch, you need to divide by 144 since there are 144 square inches in a square foot. In this case, 32 pounds per square foot would be equal to 0.222 pounds per square inch.
The safest deicer for brick driveways is one pound of magnesium chloride. This is mixed with one pound sand in a bucket and is used to cover 4 square yards of brick driveway.
An 80,000-pound object could be a large truck, a loaded cargo ship container, or a small aircraft.
The handle is the lever which allows you to pull nails or pound a nail with equal ease.
first, where are you getting a 500 pound tongue?
About 1/2 pound.
lb is a weight, square yards is an area, they can't be converted
The area of North Fork Pound Reservoir is 623,215.8890496 square meters.
One pound per square inch is a unit of measure for pressure. It is equal to the pressure of one pound of weight against gravity resting against an object with the surface area of one square inch.
If you are trying to find pound per square inch cubed, you would just divide the pound per foot cubed by 12x12x12 (1,728). One foot cubed is equal to a block of cubed inches 12x12x12, correct? Then you just add on the "pound per" measurement and you have your answer.
No it is not metric unit. It is foot-pound-sec unit. Psi is pound per square inch.
foot/second.square
"Psi" says the formula. The pound per square inch or, more accurately, pound-force per square inch - symbol: psi or lbf/in2 or lbf/in2 - is a unit of pressure or of stress based on avoirdupois units. It is the pressure resulting from a force of one pound-force applied to an area of one square inch. 1 pound per square inch = 6 894.75729 pascals Pascal (Pa) is the SI unit of pressure.