To calculate the flow of water in a pipe, you would need to know the diameter of the pipe, the pressure (40 psi), and the fluid properties. The flow rate can be determined using the Darcy-Weisbach equation, taking into account the pipe diameter, pressure, and fluid characteristics. Without more information, it is not possible to determine the flow rate accurately.
Approximately 142 gallons per minute will flow through a 4-inch pipe at 0 psi.
The standard formula to calculate flow(GPM - gallons per minute) from a CIRCULAR orifice is:29.7 * (the square root of the pressure) * (the square of the diameter of the flow orifice)EXAMPLE using 3/4" Pex Pipe(actual I.D. of 3/4 PEX Pipe is .677") and 40 PSI pressure:29.7 * 6.325(sq. root of 40) * .458(the square of the I.D. 3/4" pipe) =A GPM of 86.03Note: You also need to account for fittings in the loss calculations; while minimal several fitting will make a difference.
To calculate the pressure in psi (pounds per square inch), you would need more information such as the length and material of the pipe, as well as the elevation difference between the source and endpoint of the water flow. The flow rate alone is not sufficient to determine the psi.
The time it takes to flow 300 gallons through a 1 inch pipe at 55 psi depends on the flow rate of the pipe. You would need to know the flow rate in gallons per minute (GPM) of the 1 inch pipe to calculate the time it takes. Without the flow rate, it is not possible to determine the exact time it will take.
To convert pressure (psi) to flow rate (GPM) for water, the specific conversion formula depends on the pipe size and type, as well as the physical properties of the water being pumped. Generally, you would need to use a flow rate calculator that takes into consideration the pressure drop due to friction in the piping system and other factors. The inside diameter (ID) of the pipe is also a factor in determining the flow rate, as it affects the velocity of the water flowing through the pipe.
300 gallons per minute
2.5 gallons per minute
Water flow rate half inch PVC pipe 65 psi?
0 gallons per minute will flow threw any pipe at 0 psi.
1200
Depends on what is flowing through the pipe and the temperature of the pipe.
Maximum PSI rating is on the outside rating of the pipe
Approximately 142 gallons per minute will flow through a 4-inch pipe at 0 psi.
10gpm
water or something else?ZERO as the 120 PSI exceeds the safe WOG pressure rating..GREAT trick question
More, depending on how long you allow the flow to flow.
Flow = Pressure / surface S = PI * ( Diameter / 2 ) ^ 2 now you can do the math... I can't tell with gallons, inch and psi.