This question does not make any sense. A cubic foot per minute is a measure of the rate of flow, with dimensions [L3T-1]. A knot is a measure of linear speed, with dimensions [LT-1]. Basic dimensional analysis teaches that in most cases you cannot convert between measures with different dimensions without additional information.
To convert cubic feet per hour to liters per minute, you can use the conversion factor: 1 cubic foot = 28.3168 liters and 1 hour = 60 minutes. So, you can multiply the cubic feet per hour value by 28.3168/60 to get liters per minute.
To convert cubic feet to cubic yards, you need to divide the number of cubic feet by 27 since there are 27 cubic feet in a cubic yard. So, to convert cubic feet to cubic yards, divide the number of cubic feet by 27.
No, standard cubic feet per minute (SCFM) is a measure of gas flow rate, while inches of water is a unit of pressure. The two units cannot be directly converted into each other as they measure different physical quantities.
The units of cubic feet per minute and square feet are not directly convertible because they measure different quantities (volume and area). To convert from cubic feet to square feet, you would need more information about the shape or dimensions of the space.
To convert cubic yards to cubic feet, you multiply the number of cubic yards by 27. This is because 1 cubic yard is equal to 27 cubic feet.
cubic feet per hour x 0.016666667 = cubic feet per minute
Multiply cubic feet per second by 60 to get cubic feet per minute.
cubic feet per second x 60 = cubic feet per minute
Cubic feet per minute x 28.3168 = liters per minute
Multiply liters per minute by 0.0353146667 to get cubic feet per minute.
Use this formula to convert gallons per minute to cubic feet per second:gallons per minute x 0.002228 = cubic feet per second. So; 500 x 0.002228 = about 1.114 cubic feet per second.
You cannot without knowing the dimensions and shape.
Divide by 60.
liters per minute x 2.1189 = cubic feet per hour
300 cubic meters per hour is about 176.57 cubic feet per minute.Formula: Cubic meters per hour x 0.5886 (rounded) = cubic feet per minute
To convert cubic feet per hour to liters per minute, you can use the conversion factor: 1 cubic foot = 28.3168 liters and 1 hour = 60 minutes. So, you can multiply the cubic feet per hour value by 28.3168/60 to get liters per minute.
You can't convert those units. Milimeters of water (mmH2O) is a unit of pressure equal to about 13.6 mmHg. Cubic feet per minute is a measure of fluid flow.