To convert pounds to dry tons, divide the weight in pounds by 2000, since there are 2000 pounds in a dry ton. For example, to convert 46660 pounds to dry tons: 46660 pounds / 2000 = 23.33 dry tons.
To convert pricing from dry ton to wet ton, you need to adjust for the moisture content. The calculation involves dividing the cost per dry ton by the percentage of dry material in the wet ton. This will give you the equivalent cost per wet ton.
To convert metric tons (tonnes) to net tons, simply divide the metric tons by 1.10231. This will give you the equivalent weight in net tons. For example, 10 metric tons is approximately equal to 9.07 net tons.
To convert 3.5 tons to pounds, you would multiply 3.5 by 2000 (since there are 2000 pounds in one ton). So, 3.5 tons is equal to 7000 pounds.
dry
To convert pounds to dry tons, divide the weight in pounds by 2000, since there are 2000 pounds in a dry ton. For example, to convert 46660 pounds to dry tons: 46660 pounds / 2000 = 23.33 dry tons.
Dry metric tons are metric tons without moisture. 100 metric tons at 10% moisture = 90 dry metric tons. The formula is metric tons equals dry metric tons less moisture.
To convert pricing from dry ton to wet ton, you need to adjust for the moisture content. The calculation involves dividing the cost per dry ton by the percentage of dry material in the wet ton. This will give you the equivalent cost per wet ton.
It depends on the density of the sand, between about 1.4 tons dry, 1.7 tons rammed, dry. Wet sand will be heavier.
It will depend on (a) the bulk density of the dry sand and (b) the moisture content of the wet sand.
To convert moisture content from dry basis to wet basis, use the formula: MCwet = (MCdry / (1 - MCdry)) where MCwet is the moisture content on a wet basis and MCdry is the moisture content on a dry basis. For example, if the moisture content on a dry basis is 10%, the moisture content on a wet basis would be 11.1%.
How Dry Cell Batteries and Wet Cell Batteries are the SameThey both convert energy "stored" in chemical compounds into electrical energy.
To convert liquid aluminum sulfate to dry tons, you need to know the density of the liquid aluminum sulfate. Once you have the density, multiply the volume of liquid aluminum sulfate in the truck load (in gallons or liters) by the density to get the weight in pounds. Finally, divide the weight in pounds by 2000 to convert to dry tons.
Something that is damp or emptiness. These two things are not wet or dry.
Wet they cut wet after shampoo-dry they cut it dry
Divide pounds by 2,000 to convert to tons.
Formula: tons x 0.8928571 = long tons