0
How do you hook up outside light fixture that has black white green to house wiring with only black and white?
If your house wiring is encased in armoured (metal) sheathing back to the panel, then you can secure the green ground to the ground screw in the box. Make sure the armoured cable connector is tight on the box. This should ground the light back to the panel. If you are on "knob & tube" I would suggest thinking about re-wiring the house.
What else can I help you with?
How do you wire a intertek 4003485 light fixture for a 42 watt fluorescent bulb?
When wiring a Intertek 4003485 light fixture for a 42 watt fluorescent bulb, follow the manufacturer's instructions provided with the fixture. Typically, you will need to connect the black wire to the live/hot wire, the white wire to the neutral wire, and the green wire to the ground wire. It's important to switch off power before performing any electrical work for safety.
How do you wire a ballast that has two black wires for a one tube fluorescent lamp?
There should be a black & white wire coming from the light. Hook black to black and white to white. Then connect the ground wire to the light chassis. You need 12/2 with ground for the circuit. You do not need a light fixture box for these type lights.
How do you wire your new fixture if your old light fixture has a black wire connected to a red wire and a red wire connected to a white wire?
Connect the white and black wires back on to where the other black and white wires connected. There should also be a green pigtail coming out of the fixture which will be the ground. If it has a chain, then the wire running through the chain will be the ground wire.
I see only a red and a green wire coming out from ceiling box. What are they and how do you connect them to a ceiling light?
The red and green wires are likely the live and ground wires, respectively. To connect them to a ceiling light, connect the green wire to the ground screw on the light fixture and connect the red wire to the live wire on the fixture. Make sure to turn off the power before working on the wiring to avoid any accidents.
Why is there only red black and white wire ceiling and no green?
Each color means a different thing and there are green ones, they are just not as common There should be a bare wire along with the red, black and green wires in the ceiling. It is possible that it was cut off short or tied up to the box somewhere. this is the same as the green wire.
What are the standard light fixture wiring colors used for electrical connections?
The standard light fixture wiring colors used for electrical connections are black (hot), white (neutral), and green or bare copper (ground).
What is the 4 wire light fixture wiring diagram for this particular installation?
The 4-wire light fixture wiring diagram for this installation involves connecting the black wire to the live or hot terminal, the white wire to the neutral terminal, the green or bare wire to the ground terminal, and the red wire to the switch terminal for controlling the light.
How can I safely connect a light fixture to the electrical wiring in my home?
To safely connect a light fixture to the electrical wiring in your home, follow these steps: Turn off the power to the circuit at the breaker box. Remove the old light fixture and disconnect the wires. Connect the new light fixture's wires to the corresponding wires in the electrical box (usually black to black, white to white, and green or bare copper to the ground wire). Secure the connections with wire nuts and electrical tape. Mount the new light fixture according to the manufacturer's instructions. Turn the power back on and test the light fixture to ensure it is working properly. If you are unsure or uncomfortable with any step, it is best to consult a licensed electrician for assistance.
How to install a ceiling light fixture?
To install a ceiling light fixture, first turn off the power to the fixture at the circuit breaker. Remove the old fixture and disconnect the wires. Connect the new fixture's wires to the corresponding wires in the ceiling, usually black to black, white to white, and green or copper to the ground wire. Secure the fixture to the ceiling and turn the power back on to test the light.
What are the stereo color wiring for your 2003 chevrloet silverado?
green and black
What are the standard light fixture wire colors and their corresponding functions?
The standard light fixture wire colors are black, white, and green or bare copper. The black wire is the hot wire, the white wire is the neutral wire, and the green or bare copper wire is the ground wire.
How can I install a new light fixture?
To install a new light fixture, first turn off the power to the existing fixture at the circuit breaker. Remove the old fixture by unscrewing it from the ceiling and disconnecting the wires. Install the new fixture by connecting the wires to the corresponding colors (usually black to black, white to white, and green or copper to the ground). Secure the new fixture to the ceiling and turn the power back on to test the light.
What wires go brown and blue from old fashion red black wiring?
red - brown black - blue green/yellow - green
What are the differences between black, white, and green wires in electrical wiring?
Black wires are typically used for power supply, white wires are used for neutral connections, and green wires are used for grounding in electrical wiring.
How can I install a light with an outlet in my room?
To install a light with an outlet in your room, you will need to first turn off the power to the area where you will be working. Then, you will need to mount the light fixture to the ceiling or wall according to the manufacturer's instructions. Next, you will need to connect the wiring from the light fixture to the electrical wiring in your room, making sure to match the corresponding wires (usually black to black, white to white, and green or bare copper to the ground wire). Finally, you can install the outlet by connecting it to the electrical wiring and securing it in place. Be sure to test the light and outlet to ensure they are working properly before turning the power back on.
What are the standard fan wiring colors and their corresponding functions in electrical circuits?
The standard fan wiring colors are black, white, and green. Black is for the hot wire, white is for the neutral wire, and green is for the ground wire in electrical circuits.
How do I wire a new light fixture?
To wire a new light fixture, first turn off the power to the circuit at the breaker box. Remove the old fixture and disconnect the wires. Connect the new fixture's wires to the corresponding wires in the ceiling, typically black to black, white to white, and green or bare to the ground wire. Secure the connections with wire nuts and mount the fixture. Turn the power back on and test the light.
