0
by interchanging resistances and taking mean of it.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Can you measure a pencil with as meter stick?
Yes, a meter stick can be used to measure the length of a pencil in centimeters or millimeters. The pencil's length can be aligned with the meter stick, and the measurement can be read where the pencil ends.
Why end correction occurs?
End correction occurs in measurements due to the physical dimensions of the measuring instrument or device. The end correction accounts for the fact that the measuring point is located at some distance from the end of the instrument, requiring an adjustment to ensure accurate measurements. This correction is necessary in various fields, such as acoustics, fluid mechanics, and metrology, to ensure precision in calculations and results.
What unit of measure do you use to measure volume?
The standard unit of measure for volume is the liter (L).
Does 1000000000000 meter sticks go around the world?
No, 1000000000000 meter sticks laid end to end would measure 1 trillion meters. The circumference of the Earth is approximately 40 million meters, so the meter sticks would be way too long to go around the world.
What would a scientist use for to measure the length of a fish?
A scientist would typically use a ruler or measuring tape to measure the length of a fish. They would place the measuring tool along the fish from the tip of its mouth to the end of its tail to get an accurate measurement.
What is end correction in meter bridge?
End correction in a meter bridge refers to the added resistance due to the non-zero dimensions of the connecting wires or strips at the ends of the bridge. This added resistance needs to be accounted for when using the meter bridge for precise measurements. Calculating the end correction helps ensure accurate results when determining unknown resistances.
What is the difference between the Carey foster bridge and meter bridge?
There is no great difference between between the two in principlebut,In a Carey foster's bridge there is no end resistance whereas in the case of a metre bridge end resistance afffects our readings.Hence Carey foster bridge is more accurate than metre bridge .Carey foster bridge can also measure low resistance and high resistance but a metre bridge cannot do so.
What is the server in the data acquisition setup?
The job of the server in a data acquisition setup is to bridge the gap from the meter to dashboard. These servers help to make a complete end-to-end solution.
What is the significance of end correction?
The significance of end correction is that it is used in the radiation acoustic impedance of a circular piston.
How is meter stick used?
A meter stick is used to measure lengths up to a meter, typically in millimeters or centimeters. It is a simple measuring tool with markings along its length for accurate measurement. To use it, align one end of the object to be measured with the zero mark on the meter stick and then read the measurement where the other end of the object aligns with the scale.
Can you measure a pencil with as meter stick?
Yes, a meter stick can be used to measure the length of a pencil in centimeters or millimeters. The pencil's length can be aligned with the meter stick, and the measurement can be read where the pencil ends.
Who paid for the Golden Gate Bridge?
The Golden Gate bridge was paid for by a lobbied bond measure which in the end the founder of the Bank Of America paid for it.
What is torque nm?
Torque is a measure of turning power.Nm stands for Newton Meter. If you have a wrench that's one meter long, and pull at the end with a force of one Newton, the turning force by the head of the wrench will be one Newton meter.
What is used to check for line voltage sags?
just a digital voltage meter measure at the origin, and then at the end of line
Definition of end correction in pipe?
End correction in a pipe refers to the adjustment made to account for the influence of the end effects on fluid flow. These effects occur due to the changes in fluid behavior near the open ends of the pipe, such as velocity profiles and pressure distribution. A proper end correction ensures more accurate measurements in pipe flow systems.
When did Bridge End railway station end?
Bridge End railway station ended in 1948.
Why is it best to measure from 1 cm mark and then subtract 1 cm from the reading at end in meter scale?
0
