answersLogoWhite

0


Best Answer

This is a relatively simple wiring job. Remember that all a switch is, is a means of interrupting the power coming from source (electrical panel) and travelling to load (light fixture). Without the switch, the light would stay on constantly.

The black wire is a power wire and so is the red. The white wire is a neutral wire, and the green wire is the ground. You may have to do some trial and error to get it right as I can't see the actual wiring diagram you have.

After shutting power off to that circuit, disconnect the dimmer switch and remove. Connect the two white wires together with a wire connector. Connect the two green wires. The red wire was probably part of the dimmer switch and should now be gone, but if it isn't then just cap it off.

Now connect the black wire from the fixture to one of the terminals on the switch, and connect the black wire from the electrical panel to the remaining terminal on the switch. That's it.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar
More answers
User Avatar

AnswerBot

1w ago

To replace the dimmer switch with a regular switch, connect one black wire to the switch's black screw, the other black wire to the switch's red screw, the two white wires together with a wire nut, and two ground wires to the green screw on the switch. The red wire is likely a traveler wire for a three-way switch setup, so it can be capped off with a wire nut. Be sure to turn off the power before making any connections.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace a dimmer light switch with a regular light switch coming off of a wall plug ive got 2 black wires 2 white wires 2 grounds and one red wire going to the light?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can you replace two regular 3-way switches with two dimmer switches?

no


What is the cure for a humming ceiling fan?

One of the things to do is if your ceiling fan is being operated by a dimmer, set the dimmer to the highest setting to stop it from humming or replace the dimmer switch with a regular wall switch.


What type of dimmer do I use for an Ikea halogen 3 light track an electronic magnetic or regular dimmer?

Regular Dimmer will work.


How do you replace a 1993 Corvette headlight dimmer switch?

How do I change the dimmer switch on my 1993 corvette?


How do you replace the dimmer switch in a 1997 Honda Accord?

how to change dimmer switch on 1997 Honda accord


Is it hard to install a dimmer switch myself?

It is very simple to install a dimmer switch in place of a regular light switch.


What is a star that becomes dimmer at regular intervals?

A star that becomes dimmer at regular intervals is called a variable star. These stars exhibit changes in brightness over time due to various factors such as pulsations in their outer layers or interactions with a companion star in a binary system. By monitoring their light variations, astronomers can learn more about the properties and evolution of these stars.


Where is the headlight dimmer switch located on a 2004 Chevy Blazer S-10 and how do you replace it?

dimmer switch is on the turn signal lever, to replace you need to remove steering wheel


How do you replace a dimmer switch for a 1987 Chevy truck 4x4?

how do you replace3 dimmer switch 1987 chevy silverado 4 x 4


How do you fix a dimmer switch on a Chevy Metro 2000 LSI?

The only way to fix the dimmer switch is to replace it I have tried cleaning it lubercating it. nothing will fix it for good .so i had to replace it. It is a factory item.


Where is the dimmer switch on a 1986 Chevrolet k10?

The turn signal lever is the dimmer switch. You either pull it back or push it in. but also the dimmer switch its self is in the steering column u have to take the steering wheel off to replace


Can any dimmer work with energy efficient bulbs?

Yes, if they replace the switch at the wall.