How do you run a split circuit 15amps?

Answer 1

Answer forUSA, Canada and countries running a 60 Hertz supply service.

Split receptacles

Split receptacle installations can be found in kitchen counter receptacles. These types of receptacles are fed with a #14 three wire from a two pole 15 amp breaker. The top part of the duplex receptacle is isolated from the bottom half of the duplex receptacle by removing the brass coloured tie bar that joins the two halves together. The top part of the receptacle is fed with a full 15 amp capacity by using the black and white wires of the three wire cable and the bottom half is fed with a full 15 amp capacity by using the red and the same white wire of the three wire cable. This allows two appliances to be plugged in to the same receptacle.

SAFETY ADVICE

Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized

IF YOU ARE NOT REALLY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.

Answer 2

To run a split circuit at 15 amps, you will need to use a double-pole circuit breaker. This type of breaker allows you to split the circuit into two separate 15-amp branches that share a common neutral wire. Each branch can then supply power to different devices or outlets without exceeding the 15-amp limit. It's important to follow proper wiring guidelines and safety precautions when setting up a split circuit to prevent overloading or electrical hazards.