figure out how many amps are in a watt and x by 40
Wiki User
∙ 15y agoTo calculate the amperage of a 40-watt bulb, you need to use the formula: Amps = Watts / Volts. If the bulb operates at 120 volts (standard for US households), the amperage will be 0.33 amps (40 watts / 120 volts).
There are zero amps in a 300 watt bulb. Watts are the product of amps times volts. W = A x V. To find amperage use the equation A = W/V. If you find the voltage of the 300 watt bulb uses, divide the wattage by the voltage and it will give you the amps of a 300 watt bulb.
Okay so I searched for 3 hours on Google and no answer so here it is: 40W - 110C; 60W 140C; 100W 136C; and 100W Flood (Red Green Yellow) 125C. Standard bulb, 117VAC, 60Hz, facing up (edison Base down, free air, 22C ambient, measured with K-type thermocouple, calibrated in last 12 months....
An electric stove or oven typically uses 20 amps to operate.
A ballast typically uses around 5-10 watts of power. In this case, a 150 watt HPS bulb will consume 150 watts of power when turned on. So, in total, the ballast and the bulb together will use around 155-160 watts.
Without knowing the voltage, I can not tell you how many amps a 60 watt light uses. If you have a 12 volt system in a car, then a 60 watt light will pull 5 amps. If you have a 120 volt system in a house, then a 60 watt light will pull 1/2 amp. If you have a 240 volt system in an industrial building, then a 60 watt light will pull 1/4 amp.
It uses 2 amps
A 240 v 14 w cfl bulb uses about 0.14 amps.
a regular toaster uses about 12.5 amps
A table lamp with a 60 w bulb uses ¼ amp on a European 240 v system, or ½ amp on an American 120 v system.
There are zero amps in a 300 watt bulb. Watts are the product of amps times volts. W = A x V. To find amperage use the equation A = W/V. If you find the voltage of the 300 watt bulb uses, divide the wattage by the voltage and it will give you the amps of a 300 watt bulb.
Okay so I searched for 3 hours on Google and no answer so here it is: 40W - 110C; 60W 140C; 100W 136C; and 100W Flood (Red Green Yellow) 125C. Standard bulb, 117VAC, 60Hz, facing up (edison Base down, free air, 22C ambient, measured with K-type thermocouple, calibrated in last 12 months....
An electric stove or oven typically uses 20 amps to operate.
Yes, you can connect two 240 V heater elements to a relay rated at 240 V. Make sure that the relay's current rating is sufficient to handle the combined current draw of both heater elements to prevent any overloading or damage. Also, ensure proper wiring and insulation to maintain safety and functionality.
A typical microwave rated at 1100 watts uses 10 amps of power. This is calculated by dividing the number of watts by the voltage of 110.
Like The Light BULB :P
It uses 1150 watts, or 10 amps.
Without knowing the voltage, I can not tell you how many amps a 60 watt light uses. If you have a 12 volt system in a car, then a 60 watt light will pull 5 amps. If you have a 120 volt system in a house, then a 60 watt light will pull 1/2 amp. If you have a 240 volt system in an industrial building, then a 60 watt light will pull 1/4 amp.