0
That is called a 4 way light switch circuit. On each end of the circuit you install a 3way switch and in the middle you install a 4 way switch.
Answer using British Terminology
In the UK, 'three-way' switches are called 'two-way' switches (more logical, if you think about it!), and the 'four-way' switch is called an 'intermediate' switch.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Wire a three-way switch One light controlled by two switches- similar to a hall ligt. SPDT switches?
To wire a three-way switch with SPDT switches for one light controlled by two switches, you will need to connect the common terminal of one switch to the hot wire coming from the power source, connect the common terminal of the other switch to the light fixture, and connect the two remaining terminals of the switches together with one wire. This configuration allows either switch to control the light. Be sure to follow proper wiring techniques and safety precautions.
Why do they call a three-way switch when it isn't?
The switch operates from two locations, such as upstairs and downstairs, but there are three ways it can be set: both switches "on", both switches "off", or one switch "on" and one switch "off".
Can a single pole switch be used to control one light between two single pole switches?
Yes, this can be achieved using a setup known as a three-way switch configuration. By connecting the single pole switch in the middle of the wiring between the two three-way switches, you can control the light from any of the switches.
Can you connect one single light switch to another single light switch to control the same light on or off.?
Yes you can. There are three ways of doing this. Two are incorrect and one is the correct way of doing it.The two switches can be paralleled together to make the light fixture respond. Both of the two switches will always have to be in the on position. Either switch will turn the light off but the second switch will not turn the light on. Very inconvenient when you enter a room through one door and leave by another.The two switches can be wired in series. Both switches have to be on to operate the light but again if one of either switch is left in the off position the other switch will not operate the light fixture. Very inconvenient when you enter a room through one door and leave by another.The correct way of wiring two switches to control a central light fixture is with a three way switching system (two way in the UK). The two positions have to have special three way switches in each position. These types of switches sort out the problems of leaving a switch in a certain position to operate properly. The only criteria is that there be a three conductor cable joining the two three way switch boxes together.See related links below.
Is it possible to control a light switch with remote control?
Yes, it is possible to control a light switch with a remote control. You can purchase smart light switches that can be controlled remotely using a smartphone or a dedicated remote control device. This allows you to turn the lights on or off without physically being near the switch.
Wire a three-way switch One light controlled by two switches- similar to a hall ligt. SPDT switches?
To wire a three-way switch with SPDT switches for one light controlled by two switches, you will need to connect the common terminal of one switch to the hot wire coming from the power source, connect the common terminal of the other switch to the light fixture, and connect the two remaining terminals of the switches together with one wire. This configuration allows either switch to control the light. Be sure to follow proper wiring techniques and safety precautions.
What is the function of four way switch?
The use of a four way switch is needed when a load (such as a light) needs to be controlled from 3 locations or more. For instance when you walk down a hallway and there is a light there are probably at least two switches one at the beginning of the hallway and one at the end. These two switches will turn the light on or off from either location. These two switches will be three way switches. When the need to control a light or a load from more that two locations arises a four way switch is introduced. A light or load can be controlled an unlimited amount of locations by adding four way switches which are wired in between the two three way switches. Think of a sandwich where the three way switches are the bread and the meat and veggies are the four way switches. You can put as much meat and veggies as you want, but you always need two slices of bread on the top and bottom.
You have an outlet with three light switches controlling three different lights what is this called?
A triplex outlet. It is a simple device unless one or more of these switches are "3way" switches.
Why do they call a three-way switch when it isn't?
The switch operates from two locations, such as upstairs and downstairs, but there are three ways it can be set: both switches "on", both switches "off", or one switch "on" and one switch "off".
Pantom hourglass where in the fire temple are the three switches to light up the torches?
Go on the switch and one torch burns. Use your boomerang and make the other switches burn
Can a single pole switch be used to control one light between two single pole switches?
Yes, this can be achieved using a setup known as a three-way switch configuration. By connecting the single pole switch in the middle of the wiring between the two three-way switches, you can control the light from any of the switches.
Can you connect one single light switch to another single light switch to control the same light on or off.?
Yes you can. There are three ways of doing this. Two are incorrect and one is the correct way of doing it.The two switches can be paralleled together to make the light fixture respond. Both of the two switches will always have to be in the on position. Either switch will turn the light off but the second switch will not turn the light on. Very inconvenient when you enter a room through one door and leave by another.The two switches can be wired in series. Both switches have to be on to operate the light but again if one of either switch is left in the off position the other switch will not operate the light fixture. Very inconvenient when you enter a room through one door and leave by another.The correct way of wiring two switches to control a central light fixture is with a three way switching system (two way in the UK). The two positions have to have special three way switches in each position. These types of switches sort out the problems of leaving a switch in a certain position to operate properly. The only criteria is that there be a three conductor cable joining the two three way switch boxes together.See related links below.
Three light switches one room and one light bulb you can only go in it once what light switch turn the light bulb on it has something to do with the temperatur.?
turn 2 switches on wait one minute, turn one off go in the room if the bulb is off and warm it was the last one you turned off if its cold its the one you didnt touch and if its on its the only switch left on.
Is it possible to control a light switch with remote control?
Yes, it is possible to control a light switch with a remote control. You can purchase smart light switches that can be controlled remotely using a smartphone or a dedicated remote control device. This allows you to turn the lights on or off without physically being near the switch.
How many wall mount switch controlled lighting outlets shall be installed in every habitable room and bathroom?
There is no maximum or minimum amount in the U.S. for switched controlled outlets. You can have none if you want. However you must have one outlet installed evert 12 feet minimum or you can install more. If a wall is 2 feet or wider it must have an outlet installed.
There are three light switches on a wall one of the switches controls a light?
Is that really meant to be a question? It is like saying"There are six wheels on a car: four road wheels, a spare wheel and a steering wheel?" Please explain what you want to know and someone may be able to give you a better answer than this one.
What are travelers on a three way switch?
Travelers are the two wires used to connect two three-way switches in a lighting circuit. They allow the switches to control the same light fixture from different locations by carrying the electrical signal between the switches. When one switch is turned on, it sends power through the traveler wire to the other switch, allowing the light fixture to be turned on or off from either switch.
