According to http://www.engineersedge.com/copper_wire.htm
a single strand of solid copper wire weighs 19.8 pounds/1000 Ft or 1.98 pounds per 100 Ft That would result in about 1 pound per 50 Ft, or 1/50 pound per ft.
1000/19.8=50.505' = 50' 6 5/8" (rounded to an eighth)
Copper wire gauge sizes are not equivalent to aluminum wire gauge sizes. The gauge sizes for copper and aluminum wires are different due to their differing electrical conductivity properties. It is not possible to directly convert a copper wire size to an equivalent aluminum wire size.
The wire sheathing itself is usually marked. e.g. 14 CU 2 or 14/2 CU will indicate 14 gauge 2-wire (+ ground) copper (CU being the symbol for copper on the periodic table). For 15amp circuits you will likely has 14 gauge wire with most of that being 14/2 (Usually white, black, and bare copper).
"1 by 18 copper wire" typically refers to a type of wire that is 1 AWG (American Wire Gauge) in diameter and is made of copper. The "1" indicates its gauge size, which is relatively thick, and the "18" might refer to a specific length or a particular application context, although it’s not a standard designation for wire. Generally, copper wire of this gauge is used in various electrical applications due to its excellent conductivity and durability.
U can get 16 SWG
It completely depends on the gauge, or diameter of the wire. Some very large wires found in industrial plants can weigh more than a pound per foot, while very fine wire found in small motors can take several hundred feet to make a pound.
34 gauge copper wire will work but to use the 35 gauge copper wire is the best choice
#6 wire is good for 65 Amps as long as it is type THHN.
Copper wire gauge sizes are not equivalent to aluminum wire gauge sizes. The gauge sizes for copper and aluminum wires are different due to their differing electrical conductivity properties. It is not possible to directly convert a copper wire size to an equivalent aluminum wire size.
A pound.
0.986 pounds (about 1 pound).[1] Edit: I believe the correct answer is 101.18 feet of 12 gauge cooper wire weights 2 pounds. The American Wire Gauge (AWG) Table indicates 50.59 feet per pound. The second answer is correct.
The recommended gauge of wire for a 50 amp circuit is typically 6 AWG (American Wire Gauge) for copper wire.
The recommended gauge for copper wire to handle a 100 amp load is typically 3 AWG (American Wire Gauge).
Weight of copper wire is measured by the American Wire Gauge. Determining factors are whether or not it is solid wire, insulated and the area.
Depends on the thicknes of the wire. About three pounds, according to this site: http://www.rjleahy.com/Store/wire/cwi.htm See second chart on left... 10 ga copper wire is about 33 feet per pound.
The recommended thickness of 6 gauge copper wire for electrical wiring projects is about 0.162 inches.
The resistance value of a 1 meter copper wire depends on its gauge (thickness) and temperature. For example, a 1 meter wire of 24-gauge copper has a resistance of about 25.67 ohms at room temperature. It is important to consider these factors when calculating the resistance of copper wire.
A rather thin copper or aluminum wire.