To convert pressure from pounds per square inch (psi) to kilograms per square centimeter (kg/cm²), you can use the following conversion factor: 1 psi = 0.070307 kg/cm² Simply multiply the pressure in psi by 0.070307 to get the equivalent value in kg/cm².
Converting kilograms (kg) to pounds (lb) and then to pounds per square inch (psi) involves using the conversion factor that 1 kg is approximately equal to 2.20462 lb. Therefore, to convert 12 kg to psi, you would first convert 12 kg to pounds (12 kg * 2.20462 lb/kg) and then divide by the area in square inches. The final calculation involves dividing the weight in pounds by the area in square inches to get the pressure in psi.
1 kg/sq cm = 14.2233 psi 140 kg.sq cm = 140 x 14.2233 psi = 1991.262 psi
If each piece weighs 6 ounces, there are 3293 1/3 pieces in 1235 pounds. There are 16 ounces (avoirdupois) to a pound, so 1235 pounds = 1235 x 16 = 19760 ounces, and 19760/6 = 3293 1/3 (3293.33).
1 kg is a unit of mass, while psi (pounds per square inch) measures pressure. The two units measure different characteristics and cannot be directly converted into each other.
560.2 Kg in 1235 lbs560.186577kg*2.2046 lbs1 kg=1,235lbs
you cannot. they are different units. there is insufficient data to supply an answer However, assuming that that the information you missed out was 1235Kg/square meter (which is a standard meansure), then that equates to 1.757 psi
Use this formula: psi x 0.07031 = kg/cm270 psi x 0.07031 = about 4.921 kg/cm2
Use this formula: psi x 0.07031 = kg/cm2
1 kg = 2.2 pounds 1 cm = 0.39 inch so 1 kg/cm2 = 2.2/(0.39)^2 psi = 14.2 psi
To convert 2500 kg/m² to psi, you would need to divide by 9.81 (acceleration due to gravity in m/s²) and then multiply by 0.000145038 (conversion factor from kg/m² to psi). So, 2500 kg/m² is equivalent to approximately 36.3 psi.
1235
To convert pressure from pounds per square inch (psi) to kilograms per square centimeter (kg/cm²), you can use the following conversion factor: 1 psi = 0.070307 kg/cm² Simply multiply the pressure in psi by 0.070307 to get the equivalent value in kg/cm².
Well, darling, a kilogram is a unit of mass, while psi (pounds per square inch) is a unit of pressure. So, the two are apples and oranges, sweetie. It's like asking how many inches are in a gallon - just doesn't make sense, honey.
Converting kilograms (kg) to pounds (lb) and then to pounds per square inch (psi) involves using the conversion factor that 1 kg is approximately equal to 2.20462 lb. Therefore, to convert 12 kg to psi, you would first convert 12 kg to pounds (12 kg * 2.20462 lb/kg) and then divide by the area in square inches. The final calculation involves dividing the weight in pounds by the area in square inches to get the pressure in psi.
12
Up to 90 Kg load weight (rider, passenger, cargo, etc): Front - 1.75 bar or 25.4 PSI, Rear - 2.00 Bar or 29 PSI. Over 90 Kg load weight: Front - 2.00 Bar or 29 PSI, Rear - 2.25 bar or 32.6 PSI. XV 125 maximum load weight is 185 Kg, kerb weight is 147 Kg, total weight is 332 Kg. Tyre pressures are taken cold.