Assuming 120V, 5000W is 41.66A bassed on the formula P = V * I P = Watts
V = Volts
I = Amps
To find amps if watts and volts are known, use the formula; watts / volts = amps or 5000 / 240 = 20.83 amps
A 5000-watt inverter on a 24 volt system draws approximately 208 amps (5000 watts / 24 volts = 208.33 amps). This calculation assumes 100% efficiency, so actual power draw may be slightly higher.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
To determine how many amps are in 115 volts, you need to know the power (in watts) being used. The relationship between volts, amps, and watts is given by the formula: Watts = Volts × Amps. Therefore, to find the amps, you can rearrange the formula: Amps = Watts / Volts. For example, if you have a device that uses 1150 watts, you would have 10 amps at 115 volts (1150 watts ÷ 115 volts = 10 amps).
To find the amperage, you can use the formula: Watts = Volts x Amps. Rearranging it, we get Amps = Watts / Volts. Plugging in the values for 3000 Watts and 460 Volts, we get: Amps = 3000 / 460 = 6.52 amps.
To find amps if watts and volts are known, use the formula; watts / volts = amps or 5000 / 240 = 20.83 amps
There is no direct conversion between the two. You need to know voltage to calculate amps. This is the equation: P = V * I Where: P = Watts V = Volts I = Amps
5000 watts
5000 (watts) /120 (volts) = 41.6 amps , but to be safe you should allow 1000 watts margin for peaks, so 4000/120 is 33.3amps, although peaks might sometimes get higher than 5kw
To answer this question the voltage of the immersion heater is needed. I = W/E.
A 5000-watt inverter on a 24 volt system draws approximately 208 amps (5000 watts / 24 volts = 208.33 amps). This calculation assumes 100% efficiency, so actual power draw may be slightly higher.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
21.739 a 21.739 a
There are zero watts in 730 amps. Watts is the product of amps times volts. As you can see without a voltage no answer can be given.
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.
I t depends. Watts = Amps times volts. 40 amps x 120 volts =4800 watts or 40 Amps x 12 volts = 480 watts.