0
Add your answer:
Earn +20 pts
How do you determine how many amps a battery can handle under continuous conditions?
To determine how many amps a battery can handle, this information should be on the battery itself. You can also get a battery tester to determine amperage.
How Many Amps Can a 30 Amp Circuit Handle?
A 30 amp circuit can handle a maximum of 30 amps of current flow continuously without tripping the circuit breaker. It is important not to exceed this amperage to prevent overheating and potential fire hazards.
How many amps will 16 gauge stranded auto wire handle?
According to NEC, it's max rating in free air is 18 amps.
How many 60 watt bulbs can a 15 amp handle?
A 15 amp circuit can handle approximately 8-10 60 watt bulbs. Each 60 watt bulb draws 0.5 amps of current, so you divide the circuit's amp rating (15 amps) by the current draw per bulb (0.5 amps) to get the approximate number of bulbs it can handle.
How many amps can a 14 AWG wire carry?
A wire is not like a bucket that holds amps but more like a pipe that lets the amperage flow through it. A # 14 wire is rated at 15 amps. Code only allows up to 80% for continuous use, 15 x .8 = 12 amps.
How many amps will 4 gauge wire handle?
The amps that a four gauge wire will handle will depend with the thickness of the wire. If the wire is thin, the four gauge will handle 95 amps.
How do you determine how many amps a battery can handle under continuous conditions?
To determine how many amps a battery can handle, this information should be on the battery itself. You can also get a battery tester to determine amperage.
How many amps will a 260 ohms resistor on a 120 volt circuit use?
Just use Ohm's Law Voltage = Current x Resistance Amps = Voltage Divided By Resistance Amps = 120 / 260
02 jeep GC. I fixed wiring harnass for heater then fixed resistor then i am told that the blower motor is causing the resistor and harnass to burn. Is this possible. Do i have to replace all 3?
Yes, the blower tends to draw too many amps. Too many amps in the circuit will overheat the wires and connecters and melt them.
How many amps will a 10 kva transformer handle?
It depends on how many amps it was designed for. A 12.5kV/600v 10kVA 3 phase transformer can handle ~.5 amps on the primary and ~10A on the secondary. A 600/120V 10kVA 3 phase transformer can handle ~10A on the primary and ~50 on the secondary.
How do you confirm that you are not overloading an outlet?
Check the number of amps that your circuit can handle. You should not put devices with more than that many amps (total) on that circuit. Most houses are 15 amps and bathrooms 20 amps.
How Many Amps Can a 30 Amp Circuit Handle?
A 30 amp circuit can handle a maximum of 30 amps of current flow continuously without tripping the circuit breaker. It is important not to exceed this amperage to prevent overheating and potential fire hazards.
What causes a blower resistor to go out on 2003 jeed grand Cherokee?
The blower motor is failing and drawing too many amps.
How many amps will 16 gauge stranded auto wire handle?
According to NEC, it's max rating in free air is 18 amps.
A 120 V power supply connected to a 30 ohm resistor will produce how many amps of current?
A 120V power supply connected to a 30 Ohm resistor will produce 120/30 or 4 amps of current.
How many amps can a 1000watt inverter handle will it run a 10amp power saw?
A 1,000 watt inverter giving 110 volts is rated at 9 amps.
A meter should indicate how many volts when connected to a 100 ohm resistor that has 6 amps of current passing through it?
600 VDC.
