That depends on your router.
The current draw of a router (or any other electrical device) can be calculated by:
Amps * Volts = Watts
If you know any two, you can calculate the third.
If (for example) the router draws 750 Watts, and you know that it plugs into 120 Volts, then you can plug into the formula
Amps *120 Volts = 750 Wats
OR
Amps = 750 Watts/120 Volts
OR
Amps = 6.25
If you would like the answer in volts it would then be about:
120
A typical router used for home internet connections consumes around 0.5 to 2 amps of electricity. It is important to check the specifications of your specific router model to get an accurate reading of its power consumption.
Yes, you can use a 2.0 amps power supply for a 1.0 amps router. The higher amp rating means the power supply can provide more current than the router needs, which is fine. Just ensure the voltage output of the power supply matches the router's requirements to prevent damage.
To calculate the output amps of a 600kVA generator at 240V, you would use the formula Amps = kVA / Volts. In this case, it would be 600kVA / 240V = 2500 amps.
To find the amperage, you can use the formula: Amps = Watts/Volts. Plugging in the values, you get Amps = 1800 Watts / 110 Volts ≈ 16.36 Amps.
To find the amperage, you can use the formula: Watts = Volts x Amps. Rearranging it, we get Amps = Watts / Volts. Plugging in the values for 3000 Watts and 460 Volts, we get: Amps = 3000 / 460 = 6.52 amps.
To calculate amps from VA, you can use the formula: Amps = VA / Volts. Assuming the standard voltage in residential settings is 120V, then 145VA / 120V = 1.21A. Therefore, 145VA is approximately equal to 1.21 amps.
There are grills of many different amps. Your regular stove top ones are about 15 amps. Individual grill machines for countertop use must have amps usage printed on the label.
No router eigrp <AS #> No router ospf <process ID> No router bgp <AS #> No router rip
Turn off dhcp in router settings.
If you want to use wireless internet to connect a second PC to a router, you can use a cable cord, or coaxial cable. This can be hooked directly to the router.
It does not matter if you are connected through wireless or cable, your router can provide firewall protection for all of its ports on the LAN side. If your question is: Is my wireless router's firewall protecting me, although I do use it for wireless connectivity, the answer is yes. Your routers firewall protects you whether you use the wireless option or not.
volts X amps = watts standard 120 X 15 amps =1800watts microwaves generally use about 1000 watts which is 8.33 amps...
The word router has two syllables. Rout-er.
Amps can not give you a kilowatt with out a voltage being applied to the question. Watts = Amps x Volts. Amps = 1000/ Volts.
The device is not designed for such use.
External modems are built with a female data communications equipment (DCE) DB-25 port for connection to a controlling device such as a PC or a router. Depending on the model of the router you are connecting to, you will use that type of cable. For details lookup "modem-router configuration" on cisco.com
12/2 wire with a 20 amp breaker for normal home wiring.
There is no way to hook a LCD to a router. The router is only made for "network" traffic. It's way different then the signals needed for the LCD. You only connect the ethernet cable from the computer to the router.