0
Add your answer:
Earn +20 pts
How many amps do 8 40 watt fluorescent lights take?
Assuming each 40-watt fluorescent light takes around 0.33 amps, 8 lights would take approximately 2.64 amps in total.
How many amps does a 65 watt light bulb have at 120 volts?
To calculate the amperage, you can use the formula: Amps = Watts/Volts. For a 65-watt light bulb at 120 volts, the amperage would be 0.54 amps.
How many amps fluorescent bulb?
When you buy the bulb. All of those specifications should be on the package. To figure the Kilowatts it's pulling and cost to run. kW = amps x volts / 1000. then just take your kW x price per kw. and that will give you how much it costs to run that bulb for one hour. The amperage is on the label of the ballast. When you connect the ballast to power you will see it along with the voltage and pf of the ballast. F40T12 twin 8 foot tubes, ballast usually draws about .75 amps.
How many amps does a led light draw?
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
How much energy does a 5 watt light bulb?
That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.That varies a lot, depending on the type of light bulb. The old-fashioned incandescent light bulbs produce much less light, for the same power, than the fluorescent light bulbs.
Amps used by 32 watt fluorescent light bulbs?
If it is a 120volt light, then it is watts / volts. 32 watts / 120 = .2667 amps. <<>> fluorescent lights usually have a power factor around 0.6 so a 32 watt bulb would take around 32/(120 x 0.6) amps or 0.44 amps.
How many amps do 8 40 watt fluorescent lights take?
Assuming each 40-watt fluorescent light takes around 0.33 amps, 8 lights would take approximately 2.64 amps in total.
What size amp circuit breaker do you use on a 55 watt fluorescent light?
A 55 watt fluorescent light only pulls 0.4 amps. Lights can be installed on a 15 amp breaker using 14/2 wire. A maximum of 1440 watts is all that is allowed on a 15 amp circuit.
How can you find out if your fluorescent lights are using too many amps?
The amperage is printed on the ballast. If your meter reads higher that that what is printed there, then the ballast is drawing more amps that it should.
How many amps in a small table lamp?
A 120 volt table lamp with a 75 watt bulb will pull 0.625 amps. With a 100 watt bulb it will pull 0.833 amps. And with a modern fluorescent 13 watt bulb it will pull 0.108 amps.
What draw in amps is a standard brake light?
About 0.6 amps for a 12v 21w bulb
How many amperes does a 20 watt compact fluorescent lamp draw?
To answer this question the voltage has to be given. I = W/E. Amps = Watts/Voltage.
How many take amp 40 watt fluorescent lamp?
Watts= voltage times amps. So if you divide Watts by voltage, you will get amps = .33333 or about a 1/3 amp load. This is assuming a 120 volt circuit.
What kind of amps does a 65 watt light take?
amps equals watts divided by volts.
How many amps does a microwave draw?
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan
How many amps does a 65 watt light bulb have at 120 volts?
To calculate the amperage, you can use the formula: Amps = Watts/Volts. For a 65-watt light bulb at 120 volts, the amperage would be 0.54 amps.
How many amps fluorescent bulb?
When you buy the bulb. All of those specifications should be on the package. To figure the Kilowatts it's pulling and cost to run. kW = amps x volts / 1000. then just take your kW x price per kw. and that will give you how much it costs to run that bulb for one hour. The amperage is on the label of the ballast. When you connect the ballast to power you will see it along with the voltage and pf of the ballast. F40T12 twin 8 foot tubes, ballast usually draws about .75 amps.
