To calculate the watts from amps, you need to know the voltage of the circuit. The formula to calculate watts is: Watts = Amps x Volts. So, without knowing the voltage in the circuit, it is not possible to accurately determine the wattage from just knowing the amperage.
To convert watts to amps, you can use the formula: Amps = Watts / Volts. For example, if you're using a 120V circuit, 450 watts would be equal to 3.75 amps (450 watts / 120 volts = 3.75 amps).
The amperage in the circuit can be calculated using Ohm's Law: Amperage = Voltage / Resistance. Plugging in the values, we get Amperage = 110V / 7ohms = 15.71A. Therefore, the circuit would have approximately 15.71 amps of current flowing through it.
To calculate the number of amps, you need to know the voltage of the circuit. Using the formula Amps = Watts / Volts, if the voltage is 120V, then 9.8kW at 120V would be approximately 81.67 amps.
To find the number of amps in a circuit with 115 volts and a power rating in watts, you can use the formula: Amps = Watts / Volts. So, if you have a device that runs at 115 volts and consumes 575 watts, the amperage would be approximately 5 amps (575 watts / 115 volts = 5 amps).
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
15 amps at 80% = 12 amps continuous. Watts = Amps x Volts.
You want to know how many amps in that circuit. To do so, divide the Watts by the Volts. in your case it would be 60 watts / 120 volts = 0.5 Amps.
For a single phase circuit, the equation you are looking for is I = W/E. Amps = Watts/Volts.
To calculate the watts from amps, you need to know the voltage of the circuit. The formula to calculate watts is: Watts = Amps x Volts. So, without knowing the voltage in the circuit, it is not possible to accurately determine the wattage from just knowing the amperage.
To convert watts to amps, you can use the formula: Amps = Watts / Volts. For example, if you're using a 120V circuit, 450 watts would be equal to 3.75 amps (450 watts / 120 volts = 3.75 amps).
The amperage in the circuit can be calculated using Ohm's Law: Amperage = Voltage / Resistance. Plugging in the values, we get Amperage = 110V / 7ohms = 15.71A. Therefore, the circuit would have approximately 15.71 amps of current flowing through it.
The formula you are looking for is W = I x E, Watts = Amps x Volts.
That depends on circuit voltage. 1 watt is equal to 1 volt times 1 amp.
To calculate the number of amps, you need to know the voltage of the circuit. Using the formula Amps = Watts / Volts, if the voltage is 120V, then 9.8kW at 120V would be approximately 81.67 amps.
Volts and amps are different units of measurement, representing voltage and current, respectively. The relationship between volts and amps depends on the resistance in the circuit, given by Ohm's Law (V = I * R), where V is voltage in volts, I is current in amps, and R is resistance in ohms. So, the equivalence between volts and amps varies depending on the context of the electrical circuit.
Twenty amps is zero watts. You are missing one value. W = Amps x Volts. <<>> It depends on the resistance and the draw current in the electrical circuit.