100
To convert from Dth (dekatherms) to MCF (thousand cubic feet), you can use the conversion factor of 1 Dth = 1 MCF. This means that 1 dekatherm is equivalent to 1 thousand cubic feet. So, if you have a certain amount of natural gas in Dth, that same amount can be expressed in MCF without any conversion calculation.
1 standard cubic foot of natural gas gives about 1030 BTU
9.54
approx. 8 gal. of gas = 1000 cubic feet of natural gas. water can't be compared to natural gas in cubic feet
Specifically 1013.2 btu per standard cubic foot, for pure methane.
To convert 647.5 million cubic feet (mcf) of natural gas to dekatherms (dth), you can use the conversion factor where 1 mcf is approximately equal to 1.037 dth. Therefore, 647.5 mcf is about 672.1 dth (calculated as 647.5 mcf × 1.037 dth/mcf).
To convert from Dth (dekatherms) to MCF (thousand cubic feet), you can use the conversion factor of 1 Dth = 1 MCF. This means that 1 dekatherm is equivalent to 1 thousand cubic feet. So, if you have a certain amount of natural gas in Dth, that same amount can be expressed in MCF without any conversion calculation.
97 cubic feet of natural gas will make 1 liquid gallon.
1 standard cubic foot of natural gas gives about 1030 BTU
Approximately 35,000
100 cubic feet equals 1 therm
Ther are 1,050 BTU in one cubic foot of natural gas.
One pound of natural gas is equivalent to approximately 1.546 cubic feet or 92.6 cubic inches.
9.54
One kilogram of natural gas is approximately equivalent to about 35.3 cubic feet. This conversion can vary slightly based on the specific composition of the gas, but this figure provides a general estimate for standard natural gas.
approx. 8 gal. of gas = 1000 cubic feet of natural gas. water can't be compared to natural gas in cubic feet
Specifically 1013.2 btu per standard cubic foot, for pure methane.