Wiki User
∙ 12y ago.05 L x 342 (this is the molecular weight of sucrose) x 1.75 = 29.925g
Wiki User
∙ 10y agoTo make a 1.5% solution of sucrose, you would need 0.15 grams of sucrose for every 1 ml of solution. Therefore, for 10 ml of solution, you would need 1.5 grams of sucrose.
Wiki User
∙ 12y agoAssuming you mean a 1.5% weight/volume, a 1.5% solution would be 1.5g in 100ml. So 10ml would contain one tenth of that weight ( 10 is one tenth of 100), which would be 0.15g.
Wiki User
∙ 6y ago302 g sucrose are needed.
Wiki User
∙ 11y ago8.55 g
Usually, a discard volume of 5-10 mL of blood is recommended before collecting a sample from a central line to ensure that the sample is not contaminated with residual fluids or medications in the line. This helps ensure accurate test results.
To measure spirits the best tool is a spirit measure. A small 25ml container. When you hold this at around a 20 degree angle you can measure 12.5mls. A bar spoon is also very good for measurements of 10mls.
It is not safe to drink because its toxic to the Human body its died puple so it cant be mixed with other stuff if attempted it would turn purple and it could make you blind it contain a chemical that makes it awfull to taste and makes the stoumach wrech and makes you severlly sick. DO NOT DRINK METHELATED SPIRITS.
5/5000
it is
2 teaspoon is about 10mls
To prepare 1mM EDTA from 0.1M EDTA, you would dilute the 0.1M EDTA solution 100-fold. This means you would mix 1 volume of 0.1M EDTA with 99 volumes of a solvent (such as water) to reach a final concentration of 1mM EDTA.
To prepare a 1:100 dilution in a small volume, mix 1 part solute with 99 parts solvent (such as 1 ml solute with 99 ml solvent). For example, to dilute 1 ml of a substance in 99 ml of water, mix thoroughly to ensure a homogeneous solution. Note that maintaining accurate measurements and thorough mixing are crucial for successful dilution.
10 ml or the equivalent 10 cc (cubic centimeters) is approximately 2 tablespoons. One tablespoon is just about 5 cc/ml.
Usually, a discard volume of 5-10 mL of blood is recommended before collecting a sample from a central line to ensure that the sample is not contaminated with residual fluids or medications in the line. This helps ensure accurate test results.
10ml is equal to 2 teaspoons, as a teaspoon is 5ml
The current British Penny (1992 to present) is - 20.3mm in diameter (radius = 10.15mm) and is 1.65mm thick (height). Volume = Height x Pi (Radius x Radius) Volume = 1.65 x 3.14 (10.15 x 10.15) Therefore the volume is a smidgeon greater than 534 cubic mm.
To measure spirits the best tool is a spirit measure. A small 25ml container. When you hold this at around a 20 degree angle you can measure 12.5mls. A bar spoon is also very good for measurements of 10mls.
Infants have around 80ml per kilogram blood volume (although the range can be from 50-100ml'kg). This steadily drops to the adult values of 50-70ml/kg. A 6 month old infant weighing approx 6 kg would have about 480mls of blood. 10mls taken out for blood samples would represent around 2% of the total blood volume Repeated blood sampling in infants may result in loss of significant blood volume and so the reason why paediatric sampling bottles are used which require much smaller volumes than adults Happy new year! El Tango
A catheter is a tube inserted into the urethra to collect urine from a person's bladder. To insert a Foley catheter, have the patient lie down and, using clean hands inside sterile gloves, apply lubricant to the catheter and insert it into the patient's urethra. Be sure to push the catheter in until urine can be seen within the tube. Connect the tube to a urine collection bag, and then the procedure is complete.