If the diameter is 700 mm then the radius is 700/2 = 350mm
The circumference of the circle is 2πr = 2π.350 = 2199.115 mm
1 kilometre = 1000 metres = 1000000 mm : 2km = 2000000mm
Number of revolutions = distance travelled ÷ circumference of wheel.
2000000 ÷ 2199.115 = 909. 46 revolutions
The planet Mercury has a diameter of 4879.4 kilometers. Nonsense is the measure of its diameter in mm. But it is 4879400000 millimeters (4.8794 x 109 mm or about 5 billion mm).
Milliy
120,536 kilometers in diameter.
The equatorial diameter is about 40,076 kilometers. The polar diameter is about 40,008 kilometers. Converting these to millimeters multiplies these figures by a factor of one million. So, through the middle, top to bottom is 40,008,000,000 millimeters (4.0008 x 1010 mm). Through the middle, side to side, is 40,076,000,000 millimeters (4.0076 x 1010 mm).
The formula to calculate taper in millimeters would be: (small diameter - large diameter) / taper length. The result will give you the taper in millimeters per unit length.
The planet Mercury has a diameter of 4879.4 kilometers. Nonsense is the measure of its diameter in mm. But it is 4879400000 millimeters (4.8794 x 109 mm or about 5 billion mm).
The diameter of a US dime is approximately 0.001791 kilometers.
0.42 * 13.2=5.544
Diameter = 40 cm implies circumference = 40*pi = 125.7 cm So, in travelling 352 metres = 35200 cm, the wheel will rotate 35200/125.7 = 280.1 times (approx).
The planet Mercury has a diameter of 4879.4 kilometers. Nonsense is the measure of its diameter in mm. But it is 4879400000 millimeters (4.8794 x 109 mm or about 5 billion mm).
Milliy
The diameter of a penny is approximately 0.75 inches (19.05 millimeters). To convert this measurement to kilometers, we need to first convert inches to meters by multiplying by 0.0254 (since 1 inch is equal to 0.0254 meters). This gives us a diameter of approximately 0.0004826 meters. Finally, to convert meters to kilometers, we divide by 1000, resulting in a diameter of approximately 0.0000004826 kilometers.
Bicycle wheels with a diameter of 26 inches, travelling 35 miles per hour, are turning 452 revolutions per minute. 35 miles per hour is 36,960 inches per minute (25 *5280 * 12 / 60) 26 inches diameter is 81.7 inches circumference, so the revolutions per minute is 36,960 / 81.7 or 452 revolutions per minute.
Radius = 1/2 of the diameter = 328/2 = 164 millimeters
120,536 kilometers in diameter.
20 millimeters
The standard screw diameter in millimeters for an 8 screw is approximately 4.2mm.